upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/doc/device-tree-bindings/cpu/nios2.txt

54 lines
1.7 KiB

* Nios II Processor Binding
This binding specifies what properties available in the device tree
representation of a Nios II Processor Core.
Users can use sopc2dts tool for generating device tree sources (dts) from a
Qsys system. See more detail in: http://www.alterawiki.com/wiki/Sopc2dts
Required properties:
- compatible: Compatible property value should be "altr,nios2-1.0" or
"altr,nios2-1.1".
- reg: Contains CPU index.
- clock-frequency: Contains the clock frequency for CPU, in Hz.
- dcache-line-size: Contains data cache line size.
- icache-line-size: Contains instruction line size.
- dcache-size: Contains data cache size.
- icache-size: Contains instruction cache size.
- altr,reset-addr: Specifies CPU reset address
- altr,exception-addr: Specifies CPU exception address
Optional properties:
- altr,has-initda: Specifies CPU support initda instruction, should be 1.
- altr,has-mmu: Specifies CPU support MMU support.
- altr,has-mul: Specifies CPU hardware multipy support.
- altr,has-div: Specifies CPU hardware divide support
- altr,implementation: Nios II core implementation, this should be "fast";
Example:
cpu@0x0 {
device_type = "cpu";
compatible = "altr,nios2-1.0";
reg = <0>;
interrupt-controller;
#interrupt-cells = <1>;
clock-frequency = <125000000>;
dcache-line-size = <32>;
icache-line-size = <32>;
dcache-size = <32768>;
icache-size = <32768>;
altr,implementation = "fast";
altr,pid-num-bits = <8>;
altr,tlb-num-ways = <16>;
altr,tlb-num-entries = <128>;
altr,tlb-ptr-sz = <7>;
altr,has-div = <1>;
altr,has-mul = <1>;
altr,reset-addr = <0xc2800000>;
altr,fast-tlb-miss-addr = <0xc7fff400>;
altr,exception-addr = <0xd0000020>;
altr,has-initda = <1>;
altr,has-mmu = <1>;
};