upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
24 lines
1018 B
24 lines
1018 B
ST STiH407 USB PHY controller
|
|
|
|
This file documents the dt bindings for the usb picoPHY driver which is the PHY for both USB2 and USB3
|
|
host controllers (when controlling usb2/1.1 devices) available on STiH407 SoC family from STMicroelectronics.
|
|
|
|
Required properties:
|
|
- compatible : should be "st,stih407-usb2-phy"
|
|
- st,syscfg : phandle of sysconfig bank plus integer array containing phyparam and phyctrl register offsets
|
|
- resets : list of phandle and reset specifier pairs. There should be two entries, one
|
|
for the whole phy and one for the port
|
|
- reset-names : list of reset signal names. Should be "global" and "port"
|
|
See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
|
|
See: Documentation/devicetree/bindings/reset/reset.txt
|
|
|
|
Example:
|
|
|
|
usb2_picophy0: usbpicophy {
|
|
compatible = "st,stih407-usb2-phy";
|
|
#phy-cells = <0>;
|
|
st,syscfg = <&syscfg_core 0x100 0xf4>;
|
|
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
|
|
<&picophyreset STIH407_PICOPHY0_RESET>;
|
|
reset-names = "global", "port";
|
|
};
|
|
|