upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

Dirk Eibach 50dcf89d90 mpc83xx: Add gdsys hrcon board ... The gdsys hrcon board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x GbE (optional) - Lattice ECP3 FPGA connected via eLBC and PCIe Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de>		10 years ago
..
Kconfig	mpc83xx: Add gdsys hrcon board	10 years ago
Makefile	powerpc/mpc8349: Use generic mpc85xx DDR driver	11 years ago
cache.c	…
config.mk	powerpc: remove redundant CPU definition	11 years ago
cpu.c	qe: move immap_qe.h from arch directory into common directory	11 years ago
cpu_init.c	…
ecc.c	Driver/DDR: combine ccsr_ddr for 83xx, 85xx and 86xx	11 years ago
fdt.c	qe: move immap_qe.h from arch directory into common directory	11 years ago
interrupts.c	…
law.c	…
pci.c	…
pcie.c	…
qe_io.c	…
serdes.c	…
spd_sdram.c	…
speed.c	…
spl_minimal.c	…
start.S	powerpc/mpc83xx: Zero boot_flags arg for calling board_init_f()	10 years ago
traps.c	…
u-boot-spl.lds	…
u-boot.lds	…