upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/freescale/p1022ds
Simon Glass e895a4b06f fdt: Allow ft_board_setup() to report failure 10 years ago
..
Kconfig kconfig: remove redundant "string" type in arch and board Kconfigs 10 years ago
MAINTAINERS Add board MAINTAINERS files 11 years ago
Makefile board: powerpc: convert makefiles to Kbuild style 11 years ago
README
ddr.c Driver/DDR: Moving Freescale DDR driver to a common driver 11 years ago
diu.c Add GPL-2.0+ SPDX-License-Identifier to source files 12 years ago
law.c Add GPL-2.0+ SPDX-License-Identifier to source files 12 years ago
p1022ds.c fdt: Allow ft_board_setup() to report failure 10 years ago
spl.c common: Add get_effective_memsize() to memsize.c 11 years ago
spl_minimal.c Driver/DDR: Moving Freescale DDR driver to a common driver 11 years ago
tlb.c powerpc: p1022ds: Enable P1022DS to boot from SD Card with SPL 11 years ago

README

Overview
--------
P1022ds is a Low End Dual core platform supporting the P1022 processor
of QorIQ series. P1022 is an e500 based dual core SOC.


Pin Multiplex(hwconfig setting)
-------------------------------
Add the environment 'usb2', 'audclk' and 'tdm' to support pin multiplex
via hwconfig, i.e:
'setenv hwconfig usb2' to enable USB2 and disable eTsec2
'setenv hwconfig tdm' to enable TDM and disable Audio
'setenv hwconfig audclk:12' to enable Audio(codec clock sources is 12MHz)
and disable TDM
'setenv hwconfig 'usb2;tdm' to enable USB2 and TDM, disable eTsec2 and Audio
'setenv hwconfig 'usb2;audclk:11' to enable USB2 and Audio(codec clock sources
is 11MHz), disable eTsec2 and TDM

Warning: TDM and AUDIO can not enable simultaneous !
and AUDIO codec clock sources only setting as 11MHz or 12MHz !
'setenv hwconfig 'audclk:12;tdm' --- error !
'setenv hwconfig 'audclk:11;tdm' --- error !
'setenv hwconfig 'audclk:10' --- error !