upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Dave Liu ae5f943ba8 85xx: Fix the incorrect register used for DDR erratum1 ... The 8572 DDR erratum1: DDR controller may enter an illegal state when operating in 32-bit bus mode with 4-beat bursts. Description: When operating with a 32-bit bus, it is recommended that DDR_SDRAM_CFG[8_BE] is cleared when DDR2 memories are used. This forces the DDR controller to use 4-beat bursts when communicating to the DRAMs. However, an issue exists that could lead to data corruption when the DDR controller is in 32-bit bus mode while using 4-beat bursts. Projected Impact: If the DDR controller is operating in 32-bit bus mode with 4-beat bursts, then the controller may enter into a bad state. All subsequent reads from memory is corrupted. Four-beat bursts with a 32-bit bus only is used with DDR2 memories. Therefore, this erratum does not affect DDR3 mode. Work Arounds: To work around this issue, software must set DEBUG_1[31] in DDR memory mapped space (CCSRBAR offset + 0x2f00 for DDR_1 and CCSRBAR offset + 0x6f00 for DDR_2). Currenlty, the code is using incorrect register DDR_SDRAM_CFG_2 as condition, but it should be DDR_SDRAM_CFG register. Signed-off-by: Dave Liu <daveliu@freescale.com>		16 years ago
..
74xx_7xx	rename CFG_ macros to CONFIG_SYS	16 years ago
arm720t	rename CFG_ macros to CONFIG_SYS	16 years ago
arm920t	Merge git://git.denx.de/u-boot into x1	16 years ago
arm925t	rename CFG_ macros to CONFIG_SYS	16 years ago
arm926ejs	rename CFG_ macros to CONFIG_SYS	16 years ago
arm946es	rename CFG_ macros to CONFIG_SYS	16 years ago
arm1136	rename CFG_ macros to CONFIG_SYS	16 years ago
arm1176	rename CFG_ macros to CONFIG_SYS	16 years ago
arm_intcm	rename CFG_ macros to CONFIG_SYS	16 years ago
at32ap	rename CFG_ macros to CONFIG_SYS	16 years ago
blackfin	rename CFG_ macros to CONFIG_SYS	16 years ago
i386	rename CFG_ macros to CONFIG_SYS	16 years ago
ixp	Cleanup: fix "MHz" spelling	16 years ago
leon2	rename CFG_ macros to CONFIG_SYS	16 years ago
leon3	Merge git://git.denx.de/u-boot into x1	16 years ago
lh7a40x	rename CFG_ macros to CONFIG_SYS	16 years ago
mcf52x2	rename CFG_ macros to CONFIG_SYS	16 years ago
mcf523x	Use strmhz() to format clock frequencies	16 years ago
mcf532x	Use strmhz() to format clock frequencies	16 years ago
mcf547x_8x	Use strmhz() to format clock frequencies	16 years ago
mcf5227x	Use strmhz() to format clock frequencies	16 years ago
mcf5445x	Use strmhz() to format clock frequencies	16 years ago
microblaze	rename CFG_ macros to CONFIG_SYS	16 years ago
mips	Cleanup: fix "MHz" spelling	16 years ago
mpc5xx	rename CFG_ macros to CONFIG_SYS	16 years ago
mpc5xxx	Use strmhz() to format clock frequencies	16 years ago
mpc8xx	Cleanup: fix "MHz" spelling	16 years ago
mpc8xxx/ddr	Add debug information for DDR controller registers	16 years ago
mpc83xx	mpc83xx: Removed #ifdef CONFIG_MPC834X dependency on upmconfig function	16 years ago
mpc85xx	85xx: Fix the incorrect register used for DDR erratum1	16 years ago
mpc86xx	rename CFG_ macros to CONFIG_SYS	16 years ago
mpc512x	Use strmhz() to format clock frequencies	16 years ago
mpc824x	rename CFG_ macros to CONFIG_SYS	16 years ago
mpc8220	Cleanup: fix "MHz" spelling	16 years ago
mpc8260	rename CFG_ macros to CONFIG_SYS	16 years ago
nios	rename CFG_ macros to CONFIG_SYS	16 years ago
nios2	rename CFG_ macros to CONFIG_SYS	16 years ago
ppc4xx	Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx	16 years ago
pxa	rename CFG_ macros to CONFIG_SYS	16 years ago
s3c44b0	Cleanup: fix "MHz" spelling	16 years ago
sa1100	rename CFG_ macros to CONFIG_SYS	16 years ago
sh2	rename CFG_ macros to CONFIG_SYS	16 years ago
sh3	rename CFG_ macros to CONFIG_SYS	16 years ago
sh4	rename CFG_ macros to CONFIG_SYS	16 years ago