upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/freescale/p1_p2_rdb/p1_p2_rdb.c

311 lines
7.8 KiB

/*
* Copyright 2009-2011 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/cache.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_serdes.h>
#include <asm/io.h>
#include <miiphy.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <fsl_mdio.h>
#include <tsec.h>
#include <vsc7385.h>
#include <netdev.h>
#include <rtc.h>
#include <i2c.h>
#include <hwconfig.h>
DECLARE_GLOBAL_DATA_PTR;
#define VSC7385_RST_SET 0x00080000
#define SLIC_RST_SET 0x00040000
#define SGMII_PHY_RST_SET 0x00020000
#define PCIE_RST_SET 0x00010000
#define RGMII_PHY_RST_SET 0x02000000
#define USB_RST_CLR 0x04000000
#define USB2_PORT_OUT_EN 0x01000000
#define GPIO_DIR 0x060f0000
#define BOARD_PERI_RST_SET VSC7385_RST_SET | SLIC_RST_SET | \
SGMII_PHY_RST_SET | PCIE_RST_SET | \
RGMII_PHY_RST_SET
#define SYSCLK_MASK 0x00200000
#define BOARDREV_MASK 0x10100000
#define BOARDREV_C 0x00100000
#define BOARDREV_D 0x00000000
#define SYSCLK_66 66666666
#define SYSCLK_100 100000000
unsigned long get_board_sys_clk(ulong dummy)
{
volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
u32 val_gpdat, sysclk_gpio;
val_gpdat = in_be32(&pgpio->gpdat);
sysclk_gpio = val_gpdat & SYSCLK_MASK;
if(sysclk_gpio == 0)
return SYSCLK_66;
else
return SYSCLK_100;
return 0;
}
#ifdef CONFIG_MMC
int board_early_init_f (void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
setbits_be32(&gur->pmuxcr,
(MPC85xx_PMUXCR_SDHC_CD |
MPC85xx_PMUXCR_SDHC_WP));
return 0;
}
#endif
int checkboard (void)
{
u32 val_gpdat, board_rev_gpio;
volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
char board_rev = 0;
struct cpu_type *cpu;
val_gpdat = in_be32(&pgpio->gpdat);
board_rev_gpio = val_gpdat & BOARDREV_MASK;
if (board_rev_gpio == BOARDREV_C)
board_rev = 'C';
else if (board_rev_gpio == BOARDREV_D)
board_rev = 'D';
else
panic ("Unexpected Board REV %x detected!!\n", board_rev_gpio);
cpu = gd->arch.cpu;
printf ("Board: %sRDB Rev%c\n", cpu->name, board_rev);
setbits_be32(&pgpio->gpdir, GPIO_DIR);
/*
* Bringing the following peripherals out of reset via GPIOs
* 0 = reset and 1 = out of reset
* GPIO12 - Reset to Ethernet Switch
* GPIO13 - Reset to SLIC/SLAC devices
* GPIO14 - Reset to SGMII_PHY_N
* GPIO15 - Reset to PCIe slots
* GPIO6 - Reset to RGMII PHY
* GPIO5 - Reset to USB3300 devices 1 = reset and 0 = out of reset
*/
clrsetbits_be32(&pgpio->gpdat, USB_RST_CLR, BOARD_PERI_RST_SET);
return 0;
}
int misc_init_r(void)
{
#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
ccsr_gpio_t *gpio = (void *)CONFIG_SYS_MPC85xx_GPIO_ADDR;
setbits_be32(&gpio->gpdir, USB2_PORT_OUT_EN);
setbits_be32(&gpio->gpdat, USB2_PORT_OUT_EN);
setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_ELBC_OFF_USB2_ON);
#endif
return 0;
}
int board_early_init_r(void)
{
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
unsigned int orig_bus = i2c_get_bus_num();
u8 i2c_data;
i2c_set_bus_num(1);
if (i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 0,
1, &i2c_data, sizeof(i2c_data)) == 0) {
if (i2c_data & 0x2)
puts("NOR Flash Bank : Secondary\n");
else
puts("NOR Flash Bank : Primary\n");
if (i2c_data & 0x1) {
setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA);
puts("SD/MMC : 8-bit Mode\n");
puts("eSPI : Disabled\n");
} else {
puts("SD/MMC : 4-bit Mode\n");
puts("eSPI : Enabled\n");
}
} else {
puts("Failed reading I2C Chip 0x18 on bus 1\n");
}
i2c_set_bus_num(orig_bus);
/*
* Remap Boot flash region to caching-inhibited
* so that flash can be erased properly.
*/
/* Flush d-cache and invalidate i-cache of any FLASH data */
flush_dcache();
invalidate_icache();
/* invalidate existing TLB entry for flash */
disable_tlb(flash_esel);
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_16M, 1);
rtc_reset();
return 0;
}
#ifdef CONFIG_TSEC_ENET
int board_eth_init(bd_t *bis)
{
struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[4];
int num = 0;
char *tmp;
unsigned int vscfw_addr;
#ifdef CONFIG_TSEC1
SET_STD_TSEC_INFO(tsec_info[num], 1);
num++;
#endif
#ifdef CONFIG_TSEC2
SET_STD_TSEC_INFO(tsec_info[num], 2);
num++;
#endif
#ifdef CONFIG_TSEC3
SET_STD_TSEC_INFO(tsec_info[num], 3);
if (is_serdes_configured(SGMII_TSEC3)) {
puts("eTSEC3 is in sgmii mode.\n");
tsec_info[num].flags |= TSEC_SGMII;
}
num++;
#endif
if (!num) {
printf("No TSECs initialized\n");
return 0;
}
#ifdef CONFIG_VSC7385_ENET
/* If a VSC7385 microcode image is present, then upload it. */
if ((tmp = getenv ("vscfw_addr")) != NULL) {
vscfw_addr = simple_strtoul (tmp, NULL, 16);
printf("uploading VSC7385 microcode from %x\n", vscfw_addr);
if (vsc7385_upload_firmware((void *) vscfw_addr,
CONFIG_VSC7385_IMAGE_SIZE))
puts("Failure uploading VSC7385 microcode.\n");
} else
puts("No address specified for VSC7385 microcode.\n");
#endif
mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
mdio_info.name = DEFAULT_MII_NAME;
fsl_pq_mdio_init(bis, &mdio_info);
tsec_eth_init(bis, tsec_info, num);
return pci_eth_init(bis);
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
extern void ft_pci_board_setup(void *blob);
void ft_board_setup(void *blob, bd_t *bd)
{
const char *soc_usb_compat = "fsl-usb2-dr";
int err, usb1_off, usb2_off;
phys_addr_t base;
phys_size_t size;
ft_cpu_setup(blob, bd);
base = getenv_bootm_low();
size = getenv_bootm_size();
#if defined(CONFIG_PCI)
ft_pci_board_setup(blob);
#endif /* #if defined(CONFIG_PCI) */
fdt_fixup_memory(blob, (u64)base, (u64)size);
#if defined(CONFIG_HAS_FSL_DR_USB)
fdt_fixup_dr_usb(blob, bd);
#endif
#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
/* Delete eLBC node as it is muxed with USB2 controller */
if (hwconfig("usb2")) {
const char *soc_elbc_compat = "fsl,p1020-elbc";
int off = fdt_node_offset_by_compatible(blob, -1,
soc_elbc_compat);
if (off < 0) {
printf("WARNING: could not find compatible node"
" %s: %s.\n", soc_elbc_compat,
fdt_strerror(off));
return;
}
err = fdt_del_node(blob, off);
if (err < 0) {
printf("WARNING: could not remove %s: %s.\n",
soc_elbc_compat, fdt_strerror(err));
}
return;
}
#endif
/* Delete USB2 node as it is muxed with eLBC */
usb1_off = fdt_node_offset_by_compatible(blob, -1,
soc_usb_compat);
if (usb1_off < 0) {
printf("WARNING: could not find compatible node"
" %s: %s.\n", soc_usb_compat,
fdt_strerror(usb1_off));
return;
}
usb2_off = fdt_node_offset_by_compatible(blob, usb1_off,
soc_usb_compat);
if (usb2_off < 0) {
printf("WARNING: could not find compatible node"
" %s: %s.\n", soc_usb_compat,
fdt_strerror(usb2_off));
return;
}
err = fdt_del_node(blob, usb2_off);
if (err < 0)
printf("WARNING: could not remove %s: %s.\n",
soc_usb_compat, fdt_strerror(err));
}
#endif