upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Bin Meng 4df2b48fbe x86: ahci: Make sure interface is not busy after enabling the port ... Each time U-Boot boots on Intel Crown Bay board, the displayed hard drive information is wrong. It could be either wrong capacity or just a 'Capacity: not available' message. After enabling the debug switch, we can see the scsi inquiry command did not execute successfully. However, doing a 'scsi scan' in the U-Boot shell does not expose this issue. SCSI: Target spinup took 0 ms. SATA link 1 timeout. AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst scanning bus for devices... ahci_device_data_io: 0 byte transferred. <--- scsi inquiry fails ahci_device_data_io: 512 byte transferred. ahci_device_data_io: 512 byte transferred. ahci_device_data_io: 512 byte transferred. Device 0: (0:0) Vendor: ATA Prod.: Rev: ?8 Type: Hard Disk Capacity: 912968.3 MB = 891.5 GB (1869759264 x 512) Found 1 device(s). So uninitialized contents on the stack were passed to dev_print() to display those wrong information. The symptom were observed on two hard drives (one is Seagate, the other one is Western Digital). The fix is to make sure the AHCI interface is not busy by checking the error and status information from task file register after enabling the port in ahci_port_start() before proceeding other operations like scsi_scan(). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>		10 years ago
..
Kconfig	kconfig: add blank Kconfig files	10 years ago
Makefile	sandbox: block driver using host file/device as backing store	11 years ago
ahci.c	x86: ahci: Make sure interface is not busy after enabling the port	10 years ago
ata_piix.c	sata: implement reset_sata for dwc_ahsata	10 years ago
ata_piix.h	sata.h: Make all sata/ata drivers include <sata.h>	12 years ago
dwc_ahsata.c	sata: fix reset_sata for dwc_ahsata	10 years ago
dwc_ahsata.h	Add GPL-2.0+ SPDX-License-Identifier to source files	12 years ago
fsl_sata.c	sata: implement reset_sata for dwc_ahsata	10 years ago
fsl_sata.h	Add GPL-2.0+ SPDX-License-Identifier to source files	12 years ago
ftide020.c	Merge branch 'master' of git://git.denx.de/u-boot-nds32	12 years ago
ftide020.h	Add GPL-2.0+ SPDX-License-Identifier to source files	12 years ago
libata.c	Add GPL-2.0+ SPDX-License-Identifier to source files	12 years ago
mvsata_ide.c	arm: marvell: Move arch/kirkwood.h to arch/soc.h	10 years ago
mxc_ata.c	Add GPL-2.0+ SPDX-License-Identifier to source files	12 years ago
pata_bfin.c	sata: implement reset_sata for dwc_ahsata	10 years ago
pata_bfin.h	blackfin: include <linux/compiler.h> rather than define __iomem	10 years ago
sandbox.c	sandbox: block driver using host file/device as backing store	11 years ago
sata_dwc.c	sata: implement reset_sata for dwc_ahsata	10 years ago
sata_dwc.h	Add GPL-2.0+ SPDX-License-Identifier to source files	12 years ago
sata_sil.c	Merge branch 'master' of git://www.denx.de/git/u-boot-imx	10 years ago
sata_sil.h	Add GPL-2.0+ SPDX-License-Identifier to source files	12 years ago
sata_sil3114.c	sata: implement reset_sata for dwc_ahsata	10 years ago
sata_sil3114.h	Add GPL-2.0+ SPDX-License-Identifier to source files	12 years ago
sil680.c	Add GPL-2.0+ SPDX-License-Identifier to source files	12 years ago
sym53c8xx.c	Fix some obvious typos across multiple subsystems.	11 years ago
systemace.c	Add GPL-2.0+ SPDX-License-Identifier to source files	12 years ago