upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Alexander Graf 601147b06a serial: bcm283x_mu: Detect disabled serial device ... On the raspberry pi, you can disable the serial port to gain dynamic frequency scaling which can get handy at times. However, in such a configuration the serial controller gets its rx queue filled up with zero bytes which then happily get transmitted on to whoever calls getc() today. This patch adds detection logic for that case by checking whether the RX pin is mapped to GPIO15 and disables the mini uart if it is not mapped properly. That way we can leave the driver enabled in the tree and can determine during runtime whether serial is usable or not, having a single binary that allows for uart and non-uart operation. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Simon Glass <sjg@chromium.org>		8 years ago
..
lpc32xx_hsuart.h	serial: lpc32xx hsuart: port driver to driver model	9 years ago
net_ethoc.h	net/ethoc: support private memory configurations	9 years ago
serial_bcm283x_mu.h	serial: bcm283x_mu: Detect disabled serial device	8 years ago
serial_coldfire.h	m68k: add DM model serial driver	9 years ago
serial_mxc.h	dm: imx: serial: Support DTE mode when using driver model	9 years ago
serial_pl01x.h	serial: pl01x: Add support for devices with the rate pre-configured.	9 years ago
serial_sh.h	…
serial_stm32.h	…
serial_stm32x7.h	stm32x7: add support for stm32x7 serial driver	9 years ago