upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
507 lines
12 KiB
507 lines
12 KiB
/*
|
|
* Copyright 2007 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_pci.h>
|
|
#include <asm/fsl_ddr_sdram.h>
|
|
#include <asm/io.h>
|
|
#include <miiphy.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <tsec.h>
|
|
#include <netdev.h>
|
|
|
|
#include "../common/pixis.h"
|
|
#include "../common/sgmii_riser.h"
|
|
|
|
int checkboard (void)
|
|
{
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
|
|
volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
|
|
u8 vboot;
|
|
u8 *pixis_base = (u8 *)PIXIS_BASE;
|
|
|
|
if ((uint)&gur->porpllsr != 0xe00e0000) {
|
|
printf("immap size error %lx\n",(ulong)&gur->porpllsr);
|
|
}
|
|
printf ("Board: MPC8544DS, Sys ID: 0x%02x, "
|
|
"Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
|
|
in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
|
|
in_8(pixis_base + PIXIS_PVER));
|
|
|
|
vboot = in_8(pixis_base + PIXIS_VBOOT);
|
|
if (vboot & PIXIS_VBOOT_FMAP)
|
|
printf ("vBank: %d\n", ((vboot & PIXIS_VBOOT_FBANK) >> 6));
|
|
else
|
|
puts ("Promjet\n");
|
|
|
|
lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */
|
|
lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */
|
|
ecm->eedr = 0xffffffff; /* Clear ecm errors */
|
|
ecm->eeer = 0xffffffff; /* Enable ecm errors */
|
|
|
|
return 0;
|
|
}
|
|
|
|
phys_size_t
|
|
initdram(int board_type)
|
|
{
|
|
long dram_size = 0;
|
|
|
|
puts("Initializing\n");
|
|
|
|
dram_size = fsl_ddr_sdram();
|
|
|
|
dram_size = setup_ddr_tlbs(dram_size / 0x100000);
|
|
|
|
dram_size *= 0x100000;
|
|
|
|
puts(" DDR: ");
|
|
return dram_size;
|
|
}
|
|
|
|
#ifdef CONFIG_PCI1
|
|
static struct pci_controller pci1_hose;
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE1
|
|
static struct pci_controller pcie1_hose;
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE2
|
|
static struct pci_controller pcie2_hose;
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE3
|
|
static struct pci_controller pcie3_hose;
|
|
#endif
|
|
|
|
int first_free_busno=0;
|
|
|
|
void
|
|
pci_init_board(void)
|
|
{
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
uint devdisr = gur->devdisr;
|
|
uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
|
|
uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
|
|
|
|
debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
|
|
devdisr, io_sel, host_agent);
|
|
|
|
if (io_sel & 1) {
|
|
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
|
|
printf (" eTSEC1 is in sgmii mode.\n");
|
|
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
|
|
printf (" eTSEC3 is in sgmii mode.\n");
|
|
}
|
|
|
|
#ifdef CONFIG_PCIE3
|
|
{
|
|
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
|
|
struct pci_controller *hose = &pcie3_hose;
|
|
int pcie_ep = (host_agent == 1);
|
|
int pcie_configured = io_sel >= 6;
|
|
struct pci_region *r = hose->regions;
|
|
|
|
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
|
|
printf ("\n PCIE3 connected to ULI as %s (base address %x)",
|
|
pcie_ep ? "End Point" : "Root Complex",
|
|
(uint)pci);
|
|
if (pci->pme_msg_det) {
|
|
pci->pme_msg_det = 0xffffffff;
|
|
debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
|
|
}
|
|
printf ("\n");
|
|
|
|
/* inbound */
|
|
r += fsl_pci_setup_inbound_windows(r);
|
|
|
|
/* outbound memory */
|
|
pci_set_region(r++,
|
|
CONFIG_SYS_PCIE3_MEM_BUS,
|
|
CONFIG_SYS_PCIE3_MEM_PHYS,
|
|
CONFIG_SYS_PCIE3_MEM_SIZE,
|
|
PCI_REGION_MEM);
|
|
|
|
/* outbound io */
|
|
pci_set_region(r++,
|
|
CONFIG_SYS_PCIE3_IO_BUS,
|
|
CONFIG_SYS_PCIE3_IO_PHYS,
|
|
CONFIG_SYS_PCIE3_IO_SIZE,
|
|
PCI_REGION_IO);
|
|
|
|
#ifdef CONFIG_SYS_PCIE3_MEM_BUS2
|
|
/* outbound memory */
|
|
pci_set_region(r++,
|
|
CONFIG_SYS_PCIE3_MEM_BUS2,
|
|
CONFIG_SYS_PCIE3_MEM_PHYS2,
|
|
CONFIG_SYS_PCIE3_MEM_SIZE2,
|
|
PCI_REGION_MEM);
|
|
#endif
|
|
hose->region_count = r - hose->regions;
|
|
hose->first_busno=first_free_busno;
|
|
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
|
|
|
|
fsl_pci_init(hose);
|
|
|
|
first_free_busno=hose->last_busno+1;
|
|
printf (" PCIE3 on bus %02x - %02x\n",
|
|
hose->first_busno,hose->last_busno);
|
|
|
|
/*
|
|
* Activate ULI1575 legacy chip by performing a fake
|
|
* memory access. Needed to make ULI RTC work.
|
|
*/
|
|
in_be32((u32 *)CONFIG_SYS_PCIE3_MEM_BUS);
|
|
} else {
|
|
printf (" PCIE3: disabled\n");
|
|
}
|
|
|
|
}
|
|
#else
|
|
gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE1
|
|
{
|
|
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
|
|
struct pci_controller *hose = &pcie1_hose;
|
|
int pcie_ep = (host_agent == 5);
|
|
int pcie_configured = io_sel >= 2;
|
|
struct pci_region *r = hose->regions;
|
|
|
|
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
|
|
printf ("\n PCIE1 connected to Slot2 as %s (base address %x)",
|
|
pcie_ep ? "End Point" : "Root Complex",
|
|
(uint)pci);
|
|
if (pci->pme_msg_det) {
|
|
pci->pme_msg_det = 0xffffffff;
|
|
debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
|
|
}
|
|
printf ("\n");
|
|
|
|
/* inbound */
|
|
r += fsl_pci_setup_inbound_windows(r);
|
|
|
|
/* outbound memory */
|
|
pci_set_region(r++,
|
|
CONFIG_SYS_PCIE1_MEM_BUS,
|
|
CONFIG_SYS_PCIE1_MEM_PHYS,
|
|
CONFIG_SYS_PCIE1_MEM_SIZE,
|
|
PCI_REGION_MEM);
|
|
|
|
/* outbound io */
|
|
pci_set_region(r++,
|
|
CONFIG_SYS_PCIE1_IO_BUS,
|
|
CONFIG_SYS_PCIE1_IO_PHYS,
|
|
CONFIG_SYS_PCIE1_IO_SIZE,
|
|
PCI_REGION_IO);
|
|
|
|
#ifdef CONFIG_SYS_PCIE1_MEM_BUS2
|
|
/* outbound memory */
|
|
pci_set_region(r++,
|
|
CONFIG_SYS_PCIE1_MEM_BUS2,
|
|
CONFIG_SYS_PCIE1_MEM_PHYS2,
|
|
CONFIG_SYS_PCIE1_MEM_SIZE2,
|
|
PCI_REGION_MEM);
|
|
#endif
|
|
hose->region_count = r - hose->regions;
|
|
hose->first_busno=first_free_busno;
|
|
|
|
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
|
|
|
|
fsl_pci_init(hose);
|
|
|
|
first_free_busno=hose->last_busno+1;
|
|
printf(" PCIE1 on bus %02x - %02x\n",
|
|
hose->first_busno,hose->last_busno);
|
|
|
|
} else {
|
|
printf (" PCIE1: disabled\n");
|
|
}
|
|
|
|
}
|
|
#else
|
|
gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCIE2
|
|
{
|
|
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
|
|
struct pci_controller *hose = &pcie2_hose;
|
|
int pcie_ep = (host_agent == 3);
|
|
int pcie_configured = io_sel >= 4;
|
|
struct pci_region *r = hose->regions;
|
|
|
|
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
|
|
printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)",
|
|
pcie_ep ? "End Point" : "Root Complex",
|
|
(uint)pci);
|
|
if (pci->pme_msg_det) {
|
|
pci->pme_msg_det = 0xffffffff;
|
|
debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
|
|
}
|
|
printf ("\n");
|
|
|
|
/* inbound */
|
|
r += fsl_pci_setup_inbound_windows(r);
|
|
|
|
/* outbound memory */
|
|
pci_set_region(r++,
|
|
CONFIG_SYS_PCIE2_MEM_BUS,
|
|
CONFIG_SYS_PCIE2_MEM_PHYS,
|
|
CONFIG_SYS_PCIE2_MEM_SIZE,
|
|
PCI_REGION_MEM);
|
|
|
|
/* outbound io */
|
|
pci_set_region(r++,
|
|
CONFIG_SYS_PCIE2_IO_BUS,
|
|
CONFIG_SYS_PCIE2_IO_PHYS,
|
|
CONFIG_SYS_PCIE2_IO_SIZE,
|
|
PCI_REGION_IO);
|
|
|
|
#ifdef CONFIG_SYS_PCIE2_MEM_BUS2
|
|
/* outbound memory */
|
|
pci_set_region(r++,
|
|
CONFIG_SYS_PCIE2_MEM_BUS2,
|
|
CONFIG_SYS_PCIE2_MEM_PHYS2,
|
|
CONFIG_SYS_PCIE2_MEM_SIZE2,
|
|
PCI_REGION_MEM);
|
|
#endif
|
|
hose->region_count = r - hose->regions;
|
|
hose->first_busno=first_free_busno;
|
|
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
|
|
|
|
fsl_pci_init(hose);
|
|
first_free_busno=hose->last_busno+1;
|
|
printf (" PCIE2 on bus %02x - %02x\n",
|
|
hose->first_busno,hose->last_busno);
|
|
|
|
} else {
|
|
printf (" PCIE2: disabled\n");
|
|
}
|
|
|
|
}
|
|
#else
|
|
gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */
|
|
#endif
|
|
|
|
|
|
#ifdef CONFIG_PCI1
|
|
{
|
|
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
|
|
struct pci_controller *hose = &pci1_hose;
|
|
struct pci_region *r = hose->regions;
|
|
|
|
uint pci_agent = (host_agent == 6);
|
|
uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */
|
|
uint pci_32 = 1;
|
|
uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */
|
|
uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */
|
|
|
|
|
|
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
|
|
printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %x)\n",
|
|
(pci_32) ? 32 : 64,
|
|
(pci_speed == 33333000) ? "33" :
|
|
(pci_speed == 66666000) ? "66" : "unknown",
|
|
pci_clk_sel ? "sync" : "async",
|
|
pci_agent ? "agent" : "host",
|
|
pci_arb ? "arbiter" : "external-arbiter",
|
|
(uint)pci
|
|
);
|
|
|
|
/* inbound */
|
|
r += fsl_pci_setup_inbound_windows(r);
|
|
|
|
/* outbound memory */
|
|
pci_set_region(r++,
|
|
CONFIG_SYS_PCI1_MEM_BUS,
|
|
CONFIG_SYS_PCI1_MEM_PHYS,
|
|
CONFIG_SYS_PCI1_MEM_SIZE,
|
|
PCI_REGION_MEM);
|
|
|
|
/* outbound io */
|
|
pci_set_region(r++,
|
|
CONFIG_SYS_PCI1_IO_BUS,
|
|
CONFIG_SYS_PCI1_IO_PHYS,
|
|
CONFIG_SYS_PCI1_IO_SIZE,
|
|
PCI_REGION_IO);
|
|
|
|
#ifdef CONFIG_SYS_PCIE3_MEM_BUS2
|
|
/* outbound memory */
|
|
pci_set_region(r++,
|
|
CONFIG_SYS_PCIE3_MEM_BUS2,
|
|
CONFIG_SYS_PCIE3_MEM_PHYS2,
|
|
CONFIG_SYS_PCIE3_MEM_SIZE2,
|
|
PCI_REGION_MEM);
|
|
#endif
|
|
hose->region_count = r - hose->regions;
|
|
hose->first_busno=first_free_busno;
|
|
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
|
|
|
|
fsl_pci_init(hose);
|
|
first_free_busno=hose->last_busno+1;
|
|
printf ("PCI on bus %02x - %02x\n",
|
|
hose->first_busno,hose->last_busno);
|
|
} else {
|
|
printf (" PCI: disabled\n");
|
|
}
|
|
}
|
|
#else
|
|
gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
|
|
#endif
|
|
}
|
|
|
|
|
|
int last_stage_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
|
|
unsigned long
|
|
get_board_sys_clk(ulong dummy)
|
|
{
|
|
u8 i, go_bit, rd_clks;
|
|
ulong val = 0;
|
|
u8 *pixis_base = (u8 *)PIXIS_BASE;
|
|
|
|
go_bit = in_8(pixis_base + PIXIS_VCTL);
|
|
go_bit &= 0x01;
|
|
|
|
rd_clks = in_8(pixis_base + PIXIS_VCFGEN0);
|
|
rd_clks &= 0x1C;
|
|
|
|
/*
|
|
* Only if both go bit and the SCLK bit in VCFGEN0 are set
|
|
* should we be using the AUX register. Remember, we also set the
|
|
* GO bit to boot from the alternate bank on the on-board flash
|
|
*/
|
|
|
|
if (go_bit) {
|
|
if (rd_clks == 0x1c)
|
|
i = in_8(pixis_base + PIXIS_AUX);
|
|
else
|
|
i = in_8(pixis_base + PIXIS_SPD);
|
|
} else {
|
|
i = in_8(pixis_base + PIXIS_SPD);
|
|
}
|
|
|
|
i &= 0x07;
|
|
|
|
switch (i) {
|
|
case 0:
|
|
val = 33333333;
|
|
break;
|
|
case 1:
|
|
val = 40000000;
|
|
break;
|
|
case 2:
|
|
val = 50000000;
|
|
break;
|
|
case 3:
|
|
val = 66666666;
|
|
break;
|
|
case 4:
|
|
val = 83000000;
|
|
break;
|
|
case 5:
|
|
val = 100000000;
|
|
break;
|
|
case 6:
|
|
val = 133333333;
|
|
break;
|
|
case 7:
|
|
val = 166666666;
|
|
break;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
#ifdef CONFIG_TSEC_ENET
|
|
struct tsec_info_struct tsec_info[2];
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
|
|
int num = 0;
|
|
|
|
#ifdef CONFIG_TSEC1
|
|
SET_STD_TSEC_INFO(tsec_info[num], 1);
|
|
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
|
|
tsec_info[num].flags |= TSEC_SGMII;
|
|
num++;
|
|
#endif
|
|
#ifdef CONFIG_TSEC3
|
|
SET_STD_TSEC_INFO(tsec_info[num], 3);
|
|
if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
|
|
tsec_info[num].flags |= TSEC_SGMII;
|
|
num++;
|
|
#endif
|
|
|
|
if (!num) {
|
|
printf("No TSECs initialized\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
if (io_sel & 1)
|
|
fsl_sgmii_riser_init(tsec_info, num);
|
|
|
|
|
|
tsec_eth_init(bis, tsec_info, num);
|
|
#endif
|
|
return pci_eth_init(bis);
|
|
}
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
|
|
#ifdef CONFIG_PCI1
|
|
ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
|
|
#endif
|
|
#ifdef CONFIG_PCIE2
|
|
ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
|
|
#endif
|
|
#ifdef CONFIG_PCIE1
|
|
ft_fsl_pci_setup(blob, "pci2", &pcie3_hose);
|
|
#endif
|
|
#ifdef CONFIG_PCIE3
|
|
ft_fsl_pci_setup(blob, "pci3", &pcie2_hose);
|
|
#endif
|
|
#ifdef CONFIG_FSL_SGMII_RISER
|
|
fsl_sgmii_riser_fdt_fixup(blob);
|
|
#endif
|
|
}
|
|
#endif
|
|
|