upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Simon Glass
d7e8b2b98a
|
9 years ago | |
|---|---|---|
| .. | ||
| Kconfig | 9 years ago | |
| MAINTAINERS | 10 years ago | |
| Makefile | 10 years ago | |
| README.da850 | ||
| README.omapl138-lcdk | 10 years ago | |
| da850evm.c | 10 years ago | |
| omapl138_lcdk.c | 10 years ago | |
| u-boot-spl-da850evm.lds | 10 years ago | |
README.omapl138-lcdk
Summary
=======
This README assumes you have read README.da850. It contains some additional
information specific to building the omapl138-lcdk. The AIS file as generated
by the build is, currently, not useable due to differences in the flash
available on this board, as compared to the da850evm boards.
Flash Differences
=================
Refer to the discussion in [1] for more detail - basically the da850evm uses
SPI flash whereas the lcdk uses NAND flash to store the bootloader, and
the support isn't there in the SPL code.
It should be possible to add the support in the SPL code should someone be
sufficiently motivated.
Using the built image
=====================
The output image to use is u-boot.bin. This needs to be converted to an
AIS file as described in [1] and then flashed using the utitilty linked to
there and also described in README.da850. You _may_ be able to write using
u-boot itself, but the commands in README.da850 won't work as they write to
SPI rather than NAND.
Links
=====
[1]
http://e2e.ti.com/support/dsp/omap_applications_processors/f/42/t/386829