|
|
|
|
# SPDX-License-Identifier: GPL-2.0+
|
|
|
|
|
#
|
|
|
|
|
# Copyright (C) 2014-2016 Stefan Roese <sr@denx.de>
|
|
|
|
|
|
|
|
|
|
ifdef CONFIG_ARM64
|
|
|
|
|
|
|
|
|
|
obj-$(CONFIG_ARMADA_3700) += armada3700/
|
arm64: mvebu: Add basic support for the Marvell Armada 7K/8K SoC
Compared to the Armada 3700, the Armada 7K and 8K are much more on the
high-end side: they use a dual Cortex-A72 or a quad Cortex-A72, as
opposed to the Cortex-A53 for the Armada 3700.
The Armada 7K and 8K also use a fairly unique architecture, internally
they are composed of several components:
- One AP (Application Processor), which contains the processor itself
and a few core hardware blocks. The AP used in the Armada 7K and 8K
is called AP806, and is available in two configurations:
dual Cortex-A72 and quad Cortex-A72.
- One or two CP (Communication Processor), which contain most of the I/O
interfaces (SATA, PCIe, Ethernet, etc.). The 7K family chips have one
CP, while the 8K family chips integrate two CPs, providing two times
the number of I/O interfaces available in the CP.
The CP used in the 7K and 8K is called CP110.
All in all, this gives the following combinations:
- Armada 7020, which is a dual Cortex-A72 with one CP
- Armada 7040, which is a quad Cortex-A72 with one CP
- Armada 8020, which is a dual Cortex-A72 with two CPs
- Armada 8040, which is a quad Cortex-A72 with two CPs
This patch adds basic support for this ARMv8 based SoC into U-Boot.
Future patches will integrate other device drivers and board support,
starting with the Marvell DB-88F7040 development board.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Kostya Porotchkin <kostap@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
8 years ago
|
|
|
obj-$(CONFIG_ARMADA_8K) += armada8k/
|
|
|
|
|
obj-y += arm64-common.o
|
|
|
|
|
|
|
|
|
|
else # CONFIG_ARM64
|
|
|
|
|
|
|
|
|
|
ifdef CONFIG_KIRKWOOD
|
|
|
|
|
|
|
|
|
|
obj-y = dram.o
|
|
|
|
|
obj-y += gpio.o
|
|
|
|
|
obj-y += timer.o
|
|
|
|
|
|
|
|
|
|
else # CONFIG_KIRKWOOD
|
|
|
|
|
|
|
|
|
|
obj-y = cpu.o
|
|
|
|
|
obj-y += dram.o
|
|
|
|
|
ifndef CONFIG_SPL_BUILD
|
|
|
|
|
obj-$(CONFIG_ARMADA_375) += ../../../drivers/ddr/marvell/axp/xor.o
|
|
|
|
|
obj-$(CONFIG_ARMADA_38X) += ../../../drivers/ddr/marvell/a38x/xor.o
|
|
|
|
|
obj-$(CONFIG_ARMADA_XP) += ../../../drivers/ddr/marvell/axp/xor.o
|
|
|
|
|
obj-$(CONFIG_MVEBU_EFUSE) += efuse.o
|
|
|
|
|
endif # CONFIG_SPL_BUILD
|
|
|
|
|
obj-y += gpio.o
|
|
|
|
|
obj-y += mbus.o
|
|
|
|
|
obj-y += timer.o
|
|
|
|
|
obj-$(CONFIG_SPL_BUILD) += spl.o
|
|
|
|
|
obj-$(CONFIG_SPL_BUILD) += lowlevel_spl.o
|
|
|
|
|
|
|
|
|
|
obj-$(CONFIG_ARMADA_38X) += serdes/a38x/
|
|
|
|
|
obj-$(CONFIG_ARMADA_XP) += serdes/axp/
|
|
|
|
|
|
|
|
|
|
endif # CONFIG_KIRKWOOD
|
|
|
|
|
endif # CONFIG_ARM64
|
