powerpc 86xx: Handle CCSR relocation earlier

Currently, the CCSR gets relocated while translation is
enabled, meaning we need 2 BAT translations to get to both the
old location and the new location.  Also, the DEFAULT
CCSR location has a dependency on the BAT that maps the
FLASH region.  Moving the relocation removes this unnecessary
dependency. This makes it easier and more intutive to
modify the board's memory map.

Swap BATs 3 and 4 on 8610 so that all 86xx boards use the same
BAT for CCSR space.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

cpu/mpc86xx/start.S

@@ -219,6 +219,11 @@ boot_warm:
 	sync
 #endif
 
+#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
+	/* setup ccsrbar now while we're in real mode */
+	bl      setup_ccsrbar
+#endif
+
 	/*
 	 * Calculate absolute address in FLASH and jump there
 	 *------------------------------------------------------*/
@@ -281,10 +286,6 @@ in_flash:
 	bl      setup_bats
 	sync
 
-#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
-	/* setup ccsrbar */
-	bl      setup_ccsrbar
-#endif
 
 	/* run low-level CPU init code	   (from Flash) */
 	bl	cpu_init_f
@@ -365,10 +366,28 @@ invalidate_bats:
  * early_bats:
  *
  * Set up bats needed early on - this is usually the BAT for the
- * stack-in-cache and the Flash
+ * stack-in-cache, the Flash, and CCSR space
  */
 	.globl  early_bats
 early_bats:
+	/* IBAT 3 */
+	lis	r4, CONFIG_SYS_IBAT3L@h
+	ori     r4, r4, CONFIG_SYS_IBAT3L@l
+	lis	r3, CONFIG_SYS_IBAT3U@h
+	ori     r3, r3, CONFIG_SYS_IBAT3U@l
+	mtspr   IBAT3L, r4
+	mtspr   IBAT3U, r3
+	isync
+
+	/* DBAT 3 */
+	lis	r4, CONFIG_SYS_DBAT3L@h
+	ori     r4, r4, CONFIG_SYS_DBAT3L@l
+	lis	r3, CONFIG_SYS_DBAT3U@h
+	ori     r3, r3, CONFIG_SYS_DBAT3U@l
+	mtspr   DBAT3L, r4
+	mtspr   DBAT3U, r3
+	isync
+
 	/* IBAT 5 */
 	lis	r4, CONFIG_SYS_IBAT5L@h
 	ori     r4, r4, CONFIG_SYS_IBAT5L@l

include/configs/MPC8610HPCD.h

@@ -370,27 +370,29 @@
 #define CONFIG_SYS_IBAT2U	CONFIG_SYS_DBAT2U
 
 /*
- * BAT3		32M	Cache-inhibited, guarded
- * 0xe200_0000	1M	PCI-Express 2 I/O
- * 0xe300_0000	1M	PCI-Express 1 I/O
+ * BAT3		4M	Cache-inhibited, guarded
+ * 0xe000_0000	4M	CCSR
  */
 
-#define CONFIG_SYS_DBAT3L	(CONFIG_SYS_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
+#define CONFIG_SYS_DBAT3L	(CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT \
 			| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U	(CONFIG_SYS_PCIE2_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT3U	(CONFIG_SYS_CCSRBAR | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT3L	(CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT3U	CONFIG_SYS_DBAT3U
 
 /*
- * BAT4		4M	Cache-inhibited, guarded
- * 0xe000_0000	4M	CCSR
+ * BAT4		32M	Cache-inhibited, guarded
+ * 0xe200_0000	1M	PCI-Express 2 I/O
+ * 0xe300_0000	1M	PCI-Express 1 I/O
  */
-#define CONFIG_SYS_DBAT4L	(CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT \
+
+#define CONFIG_SYS_DBAT4L	(CONFIG_SYS_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT \
 			| BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT4U	(CONFIG_SYS_CCSRBAR | BATU_BL_1M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CONFIG_SYS_DBAT4U	(CONFIG_SYS_PCIE2_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_IBAT4L	(CONFIG_SYS_PCIE2_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
 #define CONFIG_SYS_IBAT4U	CONFIG_SYS_DBAT4U
 
+
 /*
  * BAT5		128K	Cacheable, non-guarded
  * 0xe400_0000	128K	Init RAM for stack in the CPU DCache (no backing memory)