@ -183,7 +183,7 @@ Directory Hierarchy:
/nios2 Files generic to Altera NIOS2 architecture
/nios2 Files generic to Altera NIOS2 architecture
/cpu CPU specific files
/cpu CPU specific files
/lib Architecture specific library files
/lib Architecture specific library files
/ppc Files generic to PowerPC architecture
/power pc Files generic to PowerPC architecture
/cpu CPU specific files
/cpu CPU specific files
/74xx_7xx Files specific to Freescale MPC74xx and 7xx CPUs
/74xx_7xx Files specific to Freescale MPC74xx and 7xx CPUs
/mpc5xx Files specific to Freescale MPC5xx CPUs
/mpc5xx Files specific to Freescale MPC5xx CPUs
@ -1417,7 +1417,7 @@ The following options need to be configured:
the CPU's i2c node address).
the CPU's i2c node address).
Now, the u-boot i2c code for the mpc8xx
Now, the u-boot i2c code for the mpc8xx
(arch/ppc/cpu/mpc8xx/i2c.c) sets the CPU up as a master node
(arch/power pc/cpu/mpc8xx/i2c.c) sets the CPU up as a master node
and so its address should therefore be cleared to 0 (See,
and so its address should therefore be cleared to 0 (See,
eg, MPC823e User's Manual p.16-473). So, set
eg, MPC823e User's Manual p.16-473). So, set
CONFIG_SYS_I2C_SLAVE to 0.
CONFIG_SYS_I2C_SLAVE to 0.
@ -1966,7 +1966,7 @@ Legacy uImage format:
15 arch/<arch>/lib/bootm.c All preparation done, transferring control to OS
15 arch/<arch>/lib/bootm.c All preparation done, transferring control to OS
-30 arch/ppc/lib/board.c Fatal error, hang the system
-30 arch/power pc/lib/board.c Fatal error, hang the system
-31 post/post.c POST test failed, detected by post_output_backlog()
-31 post/post.c POST test failed, detected by post_output_backlog()
-32 post/post.c POST test failed, detected by post_run_single()
-32 post/post.c POST test failed, detected by post_run_single()
@ -2727,7 +2727,7 @@ Low Level (hardware related) configuration options:
CONFIG_SYS_PCI_MSTR_MEMIO_SIZE, CONFIG_SYS_POCMR1_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR_IO_LOCAL,
CONFIG_SYS_PCI_MSTR_MEMIO_SIZE, CONFIG_SYS_POCMR1_MASK_ATTRIB, CONFIG_SYS_PCI_MSTR_IO_LOCAL,
CONFIG_SYS_PCI_MSTR_IO_BUS, CONFIG_SYS_CPU_PCI_IO_START, CONFIG_SYS_PCI_MSTR_IO_SIZE,
CONFIG_SYS_PCI_MSTR_IO_BUS, CONFIG_SYS_CPU_PCI_IO_START, CONFIG_SYS_PCI_MSTR_IO_SIZE,
CONFIG_SYS_POCMR2_MASK_ATTRIB: (MPC826x only)
CONFIG_SYS_POCMR2_MASK_ATTRIB: (MPC826x only)
Overrides the default PCI memory map in arch/ppc/cpu/mpc8260/pci.c if set.
Overrides the default PCI memory map in arch/power pc/cpu/mpc8260/pci.c if set.
- CONFIG_PCI_DISABLE_PCIE:
- CONFIG_PCI_DISABLE_PCIE:
Disable PCI-Express on systems where it is supported but not
Disable PCI-Express on systems where it is supported but not
@ -3373,7 +3373,7 @@ configure the Linux device drivers for use with your target hardware
(no, we don't intend to provide a full virtual machine interface to
(no, we don't intend to provide a full virtual machine interface to
Linux :-).
Linux :-).
But now you can ignore ALL boot loader code (in arch/ppc/mbxboot).
But now you can ignore ALL boot loader code (in arch/power pc/mbxboot).
Just make sure your machine specific header file (for instance
Just make sure your machine specific header file (for instance
include/asm-ppc/tqm8xx.h) includes the same definition of the Board
include/asm-ppc/tqm8xx.h) includes the same definition of the Board
@ -3471,7 +3471,7 @@ So a typical call to build a U-Boot image would read:
-> tools/mkimage -n '2.4.4 kernel for TQM850L' \
-> tools/mkimage -n '2.4.4 kernel for TQM850L' \
> -A ppc -O linux -T kernel -C gzip -a 0 -e 0 \
> -A ppc -O linux -T kernel -C gzip -a 0 -e 0 \
> -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/ppc/coffboot/vmlinux.gz \
> -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/power pc/coffboot/vmlinux.gz \
> examples/uImage.TQM850L
> examples/uImage.TQM850L
Image Name: 2.4.4 kernel for TQM850L
Image Name: 2.4.4 kernel for TQM850L
Created: Wed Jul 19 02:34:59 2000
Created: Wed Jul 19 02:34:59 2000
@ -3495,10 +3495,10 @@ speed for memory and install an UNCOMPRESSED image instead: this
needs more space in Flash, but boots much faster since it does not
needs more space in Flash, but boots much faster since it does not
need to be uncompressed:
need to be uncompressed:
-> gunzip /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/ppc/coffboot/vmlinux.gz
-> gunzip /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/power pc/coffboot/vmlinux.gz
-> tools/mkimage -n '2.4.4 kernel for TQM850L' \
-> tools/mkimage -n '2.4.4 kernel for TQM850L' \
> -A ppc -O linux -T kernel -C none -a 0 -e 0 \
> -A ppc -O linux -T kernel -C none -a 0 -e 0 \
> -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/ppc/coffboot/vmlinux \
> -d /opt/elsk/ppc_8xx/usr/src/linux-2.4.4/arch/power pc/coffboot/vmlinux \
> examples/uImage.TQM850L-uncompressed
> examples/uImage.TQM850L-uncompressed
Image Name: 2.4.4 kernel for TQM850L
Image Name: 2.4.4 kernel for TQM850L
Created: Wed Jul 19 02:34:59 2000
Created: Wed Jul 19 02:34:59 2000