bec9264616
ppc4xx: Fix bug in cpu_init.c (405EP instead of 450EP)
...
Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
17 years ago
aee747f19b
ppc4xx: Enable 440 GPIO init table CFG_440_GPIO_TABLE for 405 platforms
...
- Rename CFG_440_GPIO_TABLE to CFG_4xx_GPIO_TABLE
- Cleanup of the 4xx GPIO functions
- Move some GPIO defines from the cpu headers ppc405.h/ppc440.h into gpio.h
Signed-off-by: Stefan Roese <sr@denx.de>
17 years ago
dbbd125721
ppc4xx: Add PPC405EX support
...
Signed-off-by: Stefan Roese <sr@denx.de>
17 years ago
1636d1c852
Coding stylke cleanup; rebuild CHANGELOG
18 years ago
a11e06965e
Extend POST support for PPC440
...
Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
Signed-off-by: Igor Lisitsin <igor@emcraft.com>
--
18 years ago
0d974d5297
[PATCH] Add 4xx GPIO functions
...
This patch adds some 4xx GPIO functions. It also moves some of the
common code and defines into a common 4xx GPIO header file.
Signed-off-by: Stefan Roese <sr@denx.de>
18 years ago
e01bd218b0
[PATCH] Add AMCC PPC405EZ support
...
This patch adds support for the new AMCC 405EZ PPC. It is in
preparation for the AMCC Acadia board support.
Please note that this Acadia/405EZ support is still in a beta stage.
Still lot's of cleanup needed but we need a preliminary release now.
Signed-off-by: Stefan Roese <sr@denx.de>
18 years ago
4745acaa1a
[PATCH] Add support for the AMCC Katmai (440SPe) eval board
...
Signed-off-by: Stefan Roese <sr@denx.de>
18 years ago
cb4820725e
[PATCH] Fix: Compilerwarnings for SC3 board.
...
The EBC Configuration Register is now by CFG_EBC_CFG definable
Added JFFS2 support for the SC3 board.
Signed-off-by: Heiko Schocher <hs@denx.de>
18 years ago
ca43ba18e9
Added support for the SOLIDCARD III board from Eurodesign
...
Signed-off-by: Heiko Schocher <hs@denx.de>
18 years ago
0238898382
[PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
...
This code will optimize the DDR2 controller setup on a board specific
basis.
Note: This code doesn't work right now on the NAND booting image for the
Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
Signed-off-by: Stefan Roese <sr@denx.de>
18 years ago
1c2ce22620
[PATCH] Update Prodrive ALPR board support (440GX)
...
Signed-off-by: Stefan Roese <sr@denx.de>
18 years ago
e0a46554c3
* PPC405EP: Add CFG_GPIO0_OR, CFG_GPIO0_ODR to setup GPIO completely.
...
- Add configuration of Open Drain GPIO Output selection
- Add configuration of initial value of GPIO output pins
Patch by Tolunay Orkun, 07 Apr 2006
18 years ago
a4c8d1389f
Add support for PCS440EP board
...
Patch by Stefan Roese, 02 Jun 2006
19 years ago
d87080b721
GCC-4.x fixes: clean up global data pointer initialization for all boards.
19 years ago
d6c61aabc4
Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
...
now handling all 4xx cpu's.
Patch by Stefan Roese, 16 Aug 2005
20 years ago
846b0dd2dc
Changed CONFIG_440_xx to CONFIG_440xx for a consistent design (405 and linux)
...
Patch by Stefan Roese, 08 Aug 2005
20 years ago
c157d8e219
Add support for AMCC PPC440EP/GR eval boards Yosemite and Yellowstone.
...
Patch by Steven Blakeslee, 27 Jul 2005
20 years ago
3720878599
- Fix bug for initial stack in data cache as pointed out by Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in data cache can be used even if the chip select is in use.
22 years ago
b867d705b6
PPC405EP support added.
22 years ago
baa3d528fe
Changed PPC405GPr version from A to B.
22 years ago
38daa27d21
Set edge conditioning circuitry on PPC405GPr for compatibility to existing PPC405GP designs.
22 years ago
4a9cbbe832
Initial revision
23 years ago
Stefan Roese
Wolfgang Denk
Igor Lisitsin
Heiko Schocher
Wolfgang Denk
stroese
wdenk