upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Liu Gang 292dc6c501 powerpc/corenet_ds: Slave module for boot from SRIO ... For the powerpc processors with SRIO interface, boot location can be configured from SRIO1 or SRIO2 by RCW. The processor booting from SRIO can do without flash for u-boot image. The image can be fetched from another processor's memory space by SRIO link connected between them. The processor boots from SRIO is slave, the processor boots from normal flash memory space and can help slave to boot from its memory space is master. They are different environments and requirements: master: 1. NOR flash for its own u-boot image, ucode and ENV space. 2. Slave's u-boot image in master NOR flash. 3. Normally boot from local NOR flash. 4. Configure SRIO switch system if needed. slave: 1. Just has EEPROM for RCW. No flash for u-boot image, ucode and ENV. 2. Boot location should be set to SRIO1 or SRIO2 by RCW. 3. RCW should configure the SerDes, SRIO interfaces correctly. 4. Slave must be powered on after master's boot. 5. Must define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE because of no ucode locally. For the slave module, need to finish these processes: 1. Set the boot location to SRIO1 or SRIO2 by RCW. 2. Set a specific TLB entry for the boot process. 3. Set a LAW entry with the TargetID SRIO1 or SRIO2 for the boot. 4. Slave's u-boot image should be generated specifically by make xxxx_SRIOBOOT_SLAVE_config. This will set SYS_TEXT_BASE=0xFFF80000 and other configurations. Signed-off-by: Liu Gang <Gang.Liu@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>		13 years ago
..
fm	powerpc/corenet_ds: Slave module for boot from SRIO	13 years ago
phy	net: phy: make board_phy_config responsible for calling drv->config	13 years ago
4xx_enet.c	4xx_enet.c: Fix GCC 4.6 build warnings	13 years ago
8390.h	…
Makefile	net: ll_temac: Add LL TEMAC driver to u-boot	13 years ago
altera_tse.c	net/altera_tse: use flush_dcache_range instead of flush_dcache	13 years ago
altera_tse.h	…
armada100_fec.c	net/miiphy/serial: drop duplicate "NAMESIZE" define	13 years ago
armada100_fec.h	…
at91_emac.c	drivers/net/at91_emac.c: Fix GCC 4.6 build warnings	13 years ago
ax88180.c	…
ax88180.h	…
ax88796.c	…
ax88796.h	…
bfin_mac.c	…
bfin_mac.h	…
calxedaxgmac.c	net: calxedaxgmac: fix build due to missing __aligned definition	13 years ago
cs8900.c	drivers/net/cs8900.c: Fix GCC 4.6 warning	13 years ago
cs8900.h	…
davinci_emac.c	ARM: davici_emac: Fix condition for number of phy detects	13 years ago
davinci_emac.h	davinci_emac: fix for running with dcache enabled	13 years ago
dc2114x.c	…
designware.c	net/designware: Change timeout loop implementation	13 years ago
designware.h	net/designware: Try configuring phy on each dw_eth_init	13 years ago
dm9000x.c	…
dm9000x.h	…
dnet.c	drivers/net/dnet.c: Fix GCC 4.6 warnings	13 years ago
dnet.h	…
e1000.c	drivers/net/e1000.c: Fix GCC 4.6 build warnings	13 years ago
e1000.h	e1000: remove duplicate macros in e1000.h	13 years ago
e1000_spi.c	drivers/net/e1000_spi.c: Fix build warnings	13 years ago
eepro100.c	drivers/net/eepro100.c: fix GCC 4.6 build warnings	13 years ago
enc28j60.c	drivers/net/enc28j60.c: Fix GCC 4.6 warnings	13 years ago
enc28j60.h	…
ep93xx_eth.c	…
ep93xx_eth.h	…
ethoc.c	net/ethoc: use flush_dcache_range instead of flush_dcache	13 years ago
fec_mxc.c	net: fec_mxc: allow use with cache enabled	13 years ago
fec_mxc.h	net: fec_mxc: allow use with cache enabled	13 years ago
fsl_mcdmafec.c	…
fsl_mdio.c	…
ftgmac100.c	…
ftgmac100.h	…
ftmac100.c	…
ftmac100.h	…
greth.c	…
greth.h	…
inca-ip_sw.c	drivers/net/inca-ip_sw.c: Fix GCC 4.6 build warning	13 years ago
ks8695eth.c	…
lan91c96.c	drivers/net/lan91c96.c: Fix GCC 4.6 warning	13 years ago
lan91c96.h	PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X	13 years ago
macb.c	…
macb.h	…
mcffec.c	…
mcfmii.c	…
mpc5xxx_fec.c	…
mpc5xxx_fec.h	…
mpc512x_fec.c	…
mpc512x_fec.h	…
mvgbe.c	mvgbe: remove warning for unused methods	13 years ago
mvgbe.h	…
natsemi.c	…
ne2000.c	…
ne2000.h	…
ne2000_base.c	drivers/net/ne2000_base.c: Fix GCC 4.6 build warnings	13 years ago
ne2000_base.h	…
netarm_eth.c	…
netarm_eth.h	…
netconsole.c	…
nicext.h	…
ns8382x.c	drivers/net/ns8382x.c: fix GCC 4.6 build warnings	13 years ago
pcnet.c	drivers/net/pcnet.c: Change debug code to fix build warning	13 years ago
plb2800_eth.c	…
rtl8139.c	drivers/net/rtl8139.c: Fix GCC 4.6 build warnings	13 years ago
rtl8169.c	drivers/net/rtl8169.c: Fix GCC 4.6 build warning	13 years ago
sh_eth.c	net: sh_eth: Remove unnecessary return	13 years ago
sh_eth.h	sh: sh_eth: Add support SH7724	13 years ago
smc911x.c	…
smc911x.h	Improve Power Management in SMC911X driver.	13 years ago
smc91111.c	net: smc91111: use mdelay()	13 years ago
smc91111.h	PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X	13 years ago
tsec.c	powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129	13 years ago
tsi108_eth.c	…
uli526x.c	…
vsc7385.c	…
xilinx_axi_emac.c	…
xilinx_emaclite.c	…
xilinx_ll_temac.c	net: ll_temac: drop obsolete "NAMESIZE" define	13 years ago
xilinx_ll_temac.h	net: ll_temac: Add LL TEMAC driver to u-boot	13 years ago
xilinx_ll_temac_fifo.c	net: ll_temac: Add LL TEMAC driver to u-boot	13 years ago
xilinx_ll_temac_fifo.h	net: ll_temac: Add LL TEMAC driver to u-boot	13 years ago
xilinx_ll_temac_mdio.c	net: ll_temac: Add LL TEMAC driver to u-boot	13 years ago
xilinx_ll_temac_mdio.h	net: ll_temac: Add LL TEMAC driver to u-boot	13 years ago
xilinx_ll_temac_sdma.c	net: ll_temac: Add LL TEMAC driver to u-boot	13 years ago
xilinx_ll_temac_sdma.h	net: ll_temac: Add LL TEMAC driver to u-boot	13 years ago