upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/include/netdev.h

217 lines
6.4 KiB

/*
* (C) Copyright 2008
* Benjamin Warren, biggerbadderben@gmail.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* netdev.h - definitions an prototypes for network devices
*/
#ifndef _NETDEV_H_
#define _NETDEV_H_
/*
* Board and CPU-specific initialization functions
* board_eth_init() has highest priority. cpu_eth_init() only
* gets called if board_eth_init() isn't instantiated or fails.
* Return values:
* 0: success
* -1: failure
*/
int board_eth_init(bd_t *bis);
int cpu_eth_init(bd_t *bis);
/* Driver initialization prototypes */
int altera_tse_initialize(u8 dev_num, int mac_base,
int sgdma_rx_base, int sgdma_tx_base,
u32 sgdma_desc_base, u32 sgdma_desc_size);
int at91emac_register(bd_t *bis, unsigned long iobase);
int au1x00_enet_initialize(bd_t*);
int ax88180_initialize(bd_t *bis);
int bfin_EMAC_initialize(bd_t *bis);
int calxedaxgmac_initialize(u32 id, ulong base_addr);
int cs8900_initialize(u8 dev_num, int base_addr);
int davinci_emac_initialize(void);
int dc21x4x_initialize(bd_t *bis);
int designware_initialize(u32 id, ulong base_addr, u32 phy_addr, u32 interface);
int dm9000_initialize(bd_t *bis);
int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
int e1000_initialize(bd_t *bis);
int eepro100_initialize(bd_t *bis);
int enc28j60_initialize(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int mode);
int ep93xx_eth_initialize(u8 dev_num, int base_addr);
int eth_3com_initialize (bd_t * bis);
int ethoc_initialize(u8 dev_num, int base_addr);
int fec_initialize (bd_t *bis);
int fecmxc_initialize(bd_t *bis);
int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
int ftgmac100_initialize(bd_t *bits);
int ftmac100_initialize(bd_t *bits);
int ftmac110_initialize(bd_t *bits);
int greth_initialize(bd_t *bis);
void gt6426x_eth_initialize(bd_t *bis);
int inca_switch_initialize(bd_t *bis);
int ks8695_eth_initialize(void);
int ks8851_mll_initialize(u8 dev_num, int base_addr);
int lan91c96_initialize(u8 dev_num, int base_addr);
int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
int mcdmafec_initialize(bd_t *bis);
int mcffec_initialize(bd_t *bis);
int mpc512x_fec_initialize(bd_t *bis);
int mpc5xxx_fec_initialize(bd_t *bis);
int mpc82xx_scc_enet_initialize(bd_t *bis);
int mvgbe_initialize(bd_t *bis);
int natsemi_initialize(bd_t *bis);
int ne2k_register(void);
int npe_initialize(bd_t *bis);
int ns8382x_initialize(bd_t *bis);
int pcnet_initialize(bd_t *bis);
int plb2800_eth_initialize(bd_t *bis);
int ppc_4xx_eth_initialize (bd_t *bis);
int rtl8139_initialize(bd_t *bis);
int rtl8169_initialize(bd_t *bis);
int scc_initialize(bd_t *bis);
int sh_eth_initialize(bd_t *bis);
int skge_initialize(bd_t *bis);
int smc91111_initialize(u8 dev_num, int base_addr);
int smc911x_initialize(u8 dev_num, int base_addr);
int sunxi_wemac_initialize(bd_t *bis);
int tsi108_eth_initialize(bd_t *bis);
int uec_standard_init(bd_t *bis);
int uli526x_initialize(bd_t *bis);
int armada100_fec_register(unsigned long base_addr);
int xilinx_axiemac_initialize(bd_t *bis, unsigned long base_addr,
unsigned long dma_addr);
int xilinx_emaclite_initialize(bd_t *bis, unsigned long base_addr,
int txpp, int rxpp);
int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
unsigned long ctrl_addr);
int zynq_gem_initialize(bd_t *bis, int base_addr, int phy_addr, u32 emio);
/*
* As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
* exported by a public hader file, we need a global definition at this point.
*/
#if defined(CONFIG_XILINX_LL_TEMAC)
#define XILINX_LL_TEMAC_M_FIFO 0 /* use FIFO Ctrl */
#define XILINX_LL_TEMAC_M_SDMA_PLB (1 << 0)/* use SDMA Ctrl via PLB */
#define XILINX_LL_TEMAC_M_SDMA_DCR (1 << 1)/* use SDMA Ctrl via DCR */
#endif
/* Boards with PCI network controllers can call this from their board_eth_init()
* function to initialize whatever's on board.
* Return value is total # of devices found */
static inline int pci_eth_init(bd_t *bis)
{
int num = 0;
#ifdef CONFIG_PCI
#ifdef CONFIG_EEPRO100
num += eepro100_initialize(bis);
#endif
#ifdef CONFIG_TULIP
num += dc21x4x_initialize(bis);
#endif
#ifdef CONFIG_E1000
num += e1000_initialize(bis);
#endif
#ifdef CONFIG_PCNET
num += pcnet_initialize(bis);
#endif
#ifdef CONFIG_NATSEMI
num += natsemi_initialize(bis);
#endif
#ifdef CONFIG_NS8382X
num += ns8382x_initialize(bis);
#endif
#if defined(CONFIG_RTL8139)
num += rtl8139_initialize(bis);
#endif
#if defined(CONFIG_RTL8169)
num += rtl8169_initialize(bis);
#endif
#if defined(CONFIG_ULI526X)
num += uli526x_initialize(bis);
#endif
#endif /* CONFIG_PCI */
return num;
}
/*
* Boards with mv88e61xx switch can use this by defining
* CONFIG_MV88E61XX_SWITCH in respective board configheader file
* the stuct and enums here are used to specify switch configuration params
*/
#if defined(CONFIG_MV88E61XX_SWITCH)
/* constants for any 88E61xx switch */
#define MV88E61XX_MAX_PORTS_NUM 6
enum mv88e61xx_cfg_mdip {
MV88E61XX_MDIP_NOCHANGE,
MV88E61XX_MDIP_REVERSE
};
enum mv88e61xx_cfg_ledinit {
MV88E61XX_LED_INIT_DIS,
MV88E61XX_LED_INIT_EN
};
enum mv88e61xx_cfg_rgmiid {
MV88E61XX_RGMII_DELAY_DIS,
MV88E61XX_RGMII_DELAY_EN
};
enum mv88e61xx_cfg_prtstt {
MV88E61XX_PORTSTT_DISABLED,
MV88E61XX_PORTSTT_BLOCKING,
MV88E61XX_PORTSTT_LEARNING,
MV88E61XX_PORTSTT_FORWARDING
};
struct mv88e61xx_config {
char *name;
u8 vlancfg[MV88E61XX_MAX_PORTS_NUM];
enum mv88e61xx_cfg_rgmiid rgmii_delay;
enum mv88e61xx_cfg_prtstt portstate;
enum mv88e61xx_cfg_ledinit led_init;
enum mv88e61xx_cfg_mdip mdip;
u32 ports_enabled;
u8 cpuport;
};
/*
* Common mappings for Internal VLANs
* These mappings consider that all ports are useable; the driver
* will mask inexistent/unused ports.
*/
/* Switch mode : routes any port to any port */
#define MV88E61XX_VLANCFG_SWITCH { 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F }
/* Router mode: routes only CPU port 5 to/from non-CPU ports 0-4 */
#define MV88E61XX_VLANCFG_ROUTER { 0x20, 0x20, 0x20, 0x20, 0x20, 0x1F }
int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig);
#endif /* CONFIG_MV88E61XX_SWITCH */
struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id);
#ifdef CONFIG_PHYLIB
struct phy_device;
int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
struct mii_dev *bus, struct phy_device *phydev);
#else
/*
* Allow FEC to fine-tune MII configuration on boards which require this.
*/
int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
#endif
#endif /* _NETDEV_H_ */