upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/arch/powerpc/cpu/mpc85xx/cpu.c

619 lines
14 KiB

/*
* Copyright 2004,2007-2011 Freescale Semiconductor, Inc.
* (C) Copyright 2002, 2003 Motorola Inc.
* Xianghua Xiao (X.Xiao@motorola.com)
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <common.h>
#include <watchdog.h>
#include <command.h>
#include <fsl_esdhc.h>
#include <asm/cache.h>
#include <asm/io.h>
#include <asm/mmu.h>
#include <fsl_ifc.h>
#include <asm/fsl_law.h>
#include <asm/fsl_lbc.h>
#include <post.h>
#include <asm/processor.h>
#include <fsl_ddr_sdram.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Default board reset function
*/
static void
__board_reset(void)
{
/* Do nothing */
}
void board_reset(void) __attribute__((weak, alias("__board_reset")));
int checkcpu (void)
{
sys_info_t sysinfo;
uint pvr, svr;
uint ver;
uint major, minor;
struct cpu_type *cpu;
char buf1[32], buf2[32];
#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET)
ccsr_gur_t __iomem *gur =
(void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
#endif
/*
* Cornet platforms use ddr sync bit in RCW to indicate sync vs async
* mode. Previous platform use ddr ratio to do the same. This
* information is only for display here.
*/
#ifdef CONFIG_FSL_CORENET
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
u32 ddr_sync = 0; /* only async mode is supported */
#else
u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
>> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
#else /* CONFIG_FSL_CORENET */
#ifdef CONFIG_DDR_CLK_FREQ
u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
#else
u32 ddr_ratio = 0;
#endif /* CONFIG_DDR_CLK_FREQ */
#endif /* CONFIG_FSL_CORENET */
unsigned int i, core, nr_cores = cpu_numcores();
u32 mask = cpu_mask();
svr = get_svr();
major = SVR_MAJ(svr);
minor = SVR_MIN(svr);
if (cpu_numcores() > 1) {
#ifndef CONFIG_MP
puts("Unicore software on multiprocessor system!!\n"
"To enable mutlticore build define CONFIG_MP\n");
#endif
volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
printf("CPU%d: ", pic->whoami);
} else {
puts("CPU: ");
}
cpu = gd->arch.cpu;
puts(cpu->name);
if (IS_E_PROCESSOR(svr))
puts("E");
printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
pvr = get_pvr();
ver = PVR_VER(pvr);
major = PVR_MAJ(pvr);
minor = PVR_MIN(pvr);
printf("Core: ");
switch(ver) {
case PVR_VER_E500_V1:
case PVR_VER_E500_V2:
puts("e500");
break;
case PVR_VER_E500MC:
puts("e500mc");
break;
case PVR_VER_E5500:
puts("e5500");
break;
case PVR_VER_E6500:
puts("e6500");
break;
default:
puts("Unknown");
break;
}
printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
if (nr_cores > CONFIG_MAX_CPUS) {
panic("\nUnexpected number of cores: %d, max is %d\n",
nr_cores, CONFIG_MAX_CPUS);
}
get_sys_info(&sysinfo);
puts("Clock Configuration:");
for_each_cpu(i, core, nr_cores, mask) {
if (!(i & 3))
printf ("\n ");
printf("CPU%d:%-4s MHz, ", core,
strmhz(buf1, sysinfo.freq_processor[core]));
}
printf("\n CCB:%-4s MHz,", strmhz(buf1, sysinfo.freq_systembus));
printf("\n");
#ifdef CONFIG_FSL_CORENET
if (ddr_sync == 1) {
printf(" DDR:%-4s MHz (%s MT/s data rate) "
"(Synchronous), ",
strmhz(buf1, sysinfo.freq_ddrbus/2),
strmhz(buf2, sysinfo.freq_ddrbus));
} else {
printf(" DDR:%-4s MHz (%s MT/s data rate) "
"(Asynchronous), ",
strmhz(buf1, sysinfo.freq_ddrbus/2),
strmhz(buf2, sysinfo.freq_ddrbus));
}
#else
switch (ddr_ratio) {
case 0x0:
printf(" DDR:%-4s MHz (%s MT/s data rate), ",
strmhz(buf1, sysinfo.freq_ddrbus/2),
strmhz(buf2, sysinfo.freq_ddrbus));
break;
case 0x7:
printf(" DDR:%-4s MHz (%s MT/s data rate) "
"(Synchronous), ",
strmhz(buf1, sysinfo.freq_ddrbus/2),
strmhz(buf2, sysinfo.freq_ddrbus));
break;
default:
printf(" DDR:%-4s MHz (%s MT/s data rate) "
"(Asynchronous), ",
strmhz(buf1, sysinfo.freq_ddrbus/2),
strmhz(buf2, sysinfo.freq_ddrbus));
break;
}
#endif
#if defined(CONFIG_FSL_LBC)
if (sysinfo.freq_localbus > LCRR_CLKDIV) {
printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
} else {
printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
sysinfo.freq_localbus);
}
#endif
#if defined(CONFIG_FSL_IFC)
printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
#endif
#ifdef CONFIG_CPM2
printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freq_systembus));
#endif
#ifdef CONFIG_QE
printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freq_qe));
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) {
printf(" FMAN%d: %s MHz\n", i + 1,
strmhz(buf1, sysinfo.freq_fman[i]));
}
#endif
#ifdef CONFIG_SYS_DPAA_QBMAN
printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freq_qman));
#endif
#ifdef CONFIG_SYS_DPAA_PME
printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freq_pme));
#endif
puts("L1: D-cache 32 KiB enabled\n I-cache 32 KiB enabled\n");
#ifdef CONFIG_FSL_CORENET
/* Display the RCW, so that no one gets confused as to what RCW
* we're actually using for this boot.
*/
puts("Reset Configuration Word (RCW):");
for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
u32 rcw = in_be32(&gur->rcwsr[i]);
if ((i % 4) == 0)
printf("\n %08x:", i * 4);
printf(" %08x", rcw);
}
puts("\n");
#endif
return 0;
}
/* ------------------------------------------------------------------------- */
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
/* Everything after the first generation of PQ3 parts has RSTCR */
#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
defined(CONFIG_MPC8555) || defined(CONFIG_MPC8560)
unsigned long val, msr;
/*
* Initiate hard reset in debug control register DBCR0
* Make sure MSR[DE] = 1. This only resets the core.
*/
msr = mfmsr ();
msr |= MSR_DE;
mtmsr (msr);
val = mfspr(DBCR0);
val |= 0x70000000;
mtspr(DBCR0,val);
#else
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
/* Attempt board-specific reset */
board_reset();
/* Next try asserting HRESET_REQ */
out_be32(&gur->rstcr, 0x2);
udelay(100);
#endif
return 1;
}
/*
* Get timebase clock frequency
*/
#ifndef CONFIG_SYS_FSL_TBCLK_DIV
#define CONFIG_SYS_FSL_TBCLK_DIV 8
#endif
unsigned long get_tbclk (void)
{
unsigned long tbclk_div = CONFIG_SYS_FSL_TBCLK_DIV;
return (gd->bus_clk + (tbclk_div >> 1)) / tbclk_div;
}
#if defined(CONFIG_WATCHDOG)
void
reset_85xx_watchdog(void)
{
/*
* Clear TSR(WIS) bit by writing 1
*/
mtspr(SPRN_TSR, TSR_WIS);
}
void
watchdog_reset(void)
{
int re_enable = disable_interrupts();
reset_85xx_watchdog();
if (re_enable)
enable_interrupts();
}
#endif /* CONFIG_WATCHDOG */
/*
* Initializes on-chip MMC controllers.
* to override, implement board_mmc_init()
*/
int cpu_mmc_init(bd_t *bis)
{
#ifdef CONFIG_FSL_ESDHC
return fsl_esdhc_mmc_init(bis);
#else
return 0;
#endif
}
/*
* Print out the state of various machine registers.
powerpc/85xx: Add support for Integrated Flash Controller (IFC) The Integrated Flash Controller (IFC) is used to access the external NAND Flash, NOR Flash, EPROM, SRAM and Generic ASIC memories.Four chip selects are provided in IFC so that maximum of four Flash devices can be hooked, but only one can be accessed at a given time. Features supported by IFC are, - Functional muxing of pins between NAND, NOR and GPCM - Support memory banks of size 64KByte to 4 GBytes - Write protection capability (only for NAND and NOR) - Provision of Software Reset - Flexible Timing programmability for every chip select - NAND Machine - x8/ x16 NAND Flash Interface - SLC and MLC NAND Flash devices support with configurable page sizes of upto 4KB - Internal SRAM of 9KB which is directly mapped and availble at boot time for NAND Boot - Configurable block size - Boot chip select (CS0) available at system reset - NOR Machine - Data bus width of 8/16/32 - Compatible with asynchronous NOR Flash - Directly memory mapped - Supports address data multiplexed (ADM) NOR device - Boot chip select (CS0) available at system reset - GPCM Machine (NORMAL GPCM Mode) - Support for x8/16/32 bit device - Compatible with general purpose addressable device e.g. SRAM, ROM - External clock is supported with programmable division ratio - GPCM Machine (Generic ASIC Mode) - Support for x8/16/32 bit device - Address and Data are shared on I/O bus - Following Address and Data sequences can be supported on I/O bus - 32 bit I/O: AD - 16 bit I/O: AADD - 8 bit I/O : AAAADDDD - Configurable Even/Odd Parity on Address/Data bus supported Signed-off-by: Dipen Dudhat <Dipen.Dudhat@freescale.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years ago
* Currently prints out LAWs, BR0/OR0 for LBC, CSPR/CSOR/Timing
* parameters for IFC and TLBs
*/
void mpc85xx_reginfo(void)
{
print_tlbcam();
print_laws();
#if defined(CONFIG_FSL_LBC)
print_lbc_regs();
#endif
powerpc/85xx: Add support for Integrated Flash Controller (IFC) The Integrated Flash Controller (IFC) is used to access the external NAND Flash, NOR Flash, EPROM, SRAM and Generic ASIC memories.Four chip selects are provided in IFC so that maximum of four Flash devices can be hooked, but only one can be accessed at a given time. Features supported by IFC are, - Functional muxing of pins between NAND, NOR and GPCM - Support memory banks of size 64KByte to 4 GBytes - Write protection capability (only for NAND and NOR) - Provision of Software Reset - Flexible Timing programmability for every chip select - NAND Machine - x8/ x16 NAND Flash Interface - SLC and MLC NAND Flash devices support with configurable page sizes of upto 4KB - Internal SRAM of 9KB which is directly mapped and availble at boot time for NAND Boot - Configurable block size - Boot chip select (CS0) available at system reset - NOR Machine - Data bus width of 8/16/32 - Compatible with asynchronous NOR Flash - Directly memory mapped - Supports address data multiplexed (ADM) NOR device - Boot chip select (CS0) available at system reset - GPCM Machine (NORMAL GPCM Mode) - Support for x8/16/32 bit device - Compatible with general purpose addressable device e.g. SRAM, ROM - External clock is supported with programmable division ratio - GPCM Machine (Generic ASIC Mode) - Support for x8/16/32 bit device - Address and Data are shared on I/O bus - Following Address and Data sequences can be supported on I/O bus - 32 bit I/O: AD - 16 bit I/O: AADD - 8 bit I/O : AAAADDDD - Configurable Even/Odd Parity on Address/Data bus supported Signed-off-by: Dipen Dudhat <Dipen.Dudhat@freescale.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
14 years ago
#ifdef CONFIG_FSL_IFC
print_ifc_regs();
#endif
}
/* Common ddr init for non-corenet fsl 85xx platforms */
#ifndef CONFIG_FSL_CORENET
#if (defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)) && \
!defined(CONFIG_SYS_INIT_L2_ADDR)
phys_size_t initdram(int board_type)
{
#if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD)
return fsl_ddr_sdram_size();
#else
return (phys_size_t)CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
#endif
}
#else /* CONFIG_SYS_RAMBOOT */
phys_size_t initdram(int board_type)
{
phys_size_t dram_size = 0;
#if defined(CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN)
{
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
unsigned int x = 10;
unsigned int i;
/*
* Work around to stabilize DDR DLL
*/
out_be32(&gur->ddrdllcr, 0x81000000);
asm("sync;isync;msync");
udelay(200);
while (in_be32(&gur->ddrdllcr) != 0x81000100) {
setbits_be32(&gur->devdisr, 0x00010000);
for (i = 0; i < x; i++)
;
clrbits_be32(&gur->devdisr, 0x00010000);
x++;
}
}
#endif
#if defined(CONFIG_SPD_EEPROM) || \
defined(CONFIG_DDR_SPD) || \
defined(CONFIG_SYS_DDR_RAW_TIMING)
dram_size = fsl_ddr_sdram();
#else
dram_size = fixed_sdram();
#endif
dram_size = setup_ddr_tlbs(dram_size / 0x100000);
dram_size *= 0x100000;
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/*
* Initialize and enable DDR ECC.
*/
ddr_enable_ecc(dram_size);
#endif
#if defined(CONFIG_FSL_LBC)
/* Some boards also have sdram on the lbc */
lbc_sdram_init();
#endif
debug("DDR: ");
return dram_size;
}
#endif /* CONFIG_SYS_RAMBOOT */
#endif
#if CONFIG_POST & CONFIG_SYS_POST_MEMORY
/* Board-specific functions defined in each board's ddr.c */
void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
unsigned int ctrl_num);
void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn,
phys_addr_t *rpn);
unsigned int
setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg);
void clear_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg);
static void dump_spd_ddr_reg(void)
{
int i, j, k, m;
u8 *p_8;
u32 *p_32;
struct ccsr_ddr __iomem *ddr[CONFIG_NUM_DDR_CONTROLLERS];
generic_spd_eeprom_t
spd[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR];
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
fsl_ddr_get_spd(spd[i], i);
puts("SPD data of all dimms (zero vaule is omitted)...\n");
puts("Byte (hex) ");
k = 1;
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++)
printf("Dimm%d ", k++);
}
puts("\n");
for (k = 0; k < sizeof(generic_spd_eeprom_t); k++) {
m = 0;
printf("%3d (0x%02x) ", k, k);
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
p_8 = (u8 *) &spd[i][j];
if (p_8[k]) {
printf("0x%02x ", p_8[k]);
m++;
} else
puts(" ");
}
}
if (m)
puts("\n");
else
puts("\r");
}
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
switch (i) {
case 0:
ddr[i] = (void *)CONFIG_SYS_FSL_DDR_ADDR;
break;
#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
case 1:
ddr[i] = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
break;
#endif
#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
case 2:
ddr[i] = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
break;
#endif
#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
case 3:
ddr[i] = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
break;
#endif
default:
printf("%s unexpected controller number = %u\n",
__func__, i);
return;
}
}
printf("DDR registers dump for all controllers "
"(zero vaule is omitted)...\n");
puts("Offset (hex) ");
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
printf(" Base + 0x%04x", (u32)ddr[i] & 0xFFFF);
puts("\n");
for (k = 0; k < sizeof(struct ccsr_ddr)/4; k++) {
m = 0;
printf("%6d (0x%04x)", k * 4, k * 4);
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
p_32 = (u32 *) ddr[i];
if (p_32[k]) {
printf(" 0x%08x", p_32[k]);
m++;
} else
puts(" ");
}
if (m)
puts("\n");
else
puts("\r");
}
puts("\n");
}
/* invalid the TLBs for DDR and setup new ones to cover p_addr */
static int reset_tlb(phys_addr_t p_addr, u32 size, phys_addr_t *phys_offset)
{
u32 vstart = CONFIG_SYS_DDR_SDRAM_BASE;
unsigned long epn;
u32 tsize, valid, ptr;
int ddr_esel;
clear_ddr_tlbs_phys(p_addr, size>>20);
/* Setup new tlb to cover the physical address */
setup_ddr_tlbs_phys(p_addr, size>>20);
ptr = vstart;
ddr_esel = find_tlb_idx((void *)ptr, 1);
if (ddr_esel != -1) {
read_tlbcam_entry(ddr_esel, &valid, &tsize, &epn, phys_offset);
} else {
printf("TLB error in function %s\n", __func__);
return -1;
}
return 0;
}
/*
* slide the testing window up to test another area
* for 32_bit system, the maximum testable memory is limited to
* CONFIG_MAX_MEM_MAPPED
*/
int arch_memory_test_advance(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
{
phys_addr_t test_cap, p_addr;
phys_size_t p_size = min(gd->ram_size, CONFIG_MAX_MEM_MAPPED);
#if !defined(CONFIG_PHYS_64BIT) || \
!defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS) || \
(CONFIG_SYS_INIT_RAM_ADDR_PHYS < 0x100000000ull)
test_cap = p_size;
#else
test_cap = gd->ram_size;
#endif
p_addr = (*vstart) + (*size) + (*phys_offset);
if (p_addr < test_cap - 1) {
p_size = min(test_cap - p_addr, CONFIG_MAX_MEM_MAPPED);
if (reset_tlb(p_addr, p_size, phys_offset) == -1)
return -1;
*vstart = CONFIG_SYS_DDR_SDRAM_BASE;
*size = (u32) p_size;
printf("Testing 0x%08llx - 0x%08llx\n",
(u64)(*vstart) + (*phys_offset),
(u64)(*vstart) + (*phys_offset) + (*size) - 1);
} else
return 1;
return 0;
}
/* initialization for testing area */
int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
{
phys_size_t p_size = min(gd->ram_size, CONFIG_MAX_MEM_MAPPED);
*vstart = CONFIG_SYS_DDR_SDRAM_BASE;
*size = (u32) p_size; /* CONFIG_MAX_MEM_MAPPED < 4G */
*phys_offset = 0;
#if !defined(CONFIG_PHYS_64BIT) || \
!defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS) || \
(CONFIG_SYS_INIT_RAM_ADDR_PHYS < 0x100000000ull)
if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) {
puts("Cannot test more than ");
print_size(CONFIG_MAX_MEM_MAPPED,
" without proper 36BIT support.\n");
}
#endif
printf("Testing 0x%08llx - 0x%08llx\n",
(u64)(*vstart) + (*phys_offset),
(u64)(*vstart) + (*phys_offset) + (*size) - 1);
return 0;
}
/* invalid TLBs for DDR and remap as normal after testing */
int arch_memory_test_cleanup(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
{
unsigned long epn;
u32 tsize, valid, ptr;
phys_addr_t rpn = 0;
int ddr_esel;
/* disable the TLBs for this testing */
ptr = *vstart;
while (ptr < (*vstart) + (*size)) {
ddr_esel = find_tlb_idx((void *)ptr, 1);
if (ddr_esel != -1) {
read_tlbcam_entry(ddr_esel, &valid, &tsize, &epn, &rpn);
disable_tlb(ddr_esel);
}
ptr += TSIZE_TO_BYTES(tsize);
}
puts("Remap DDR ");
setup_ddr_tlbs(gd->ram_size>>20);
puts("\n");
return 0;
}
void arch_memory_failure_handle(void)
{
dump_spd_ddr_reg();
}
#endif