63be111e72
* Patch by Jon Loeliger, 2005-07-25
...
Move the TSEC driver out of cpu/mpc85xx as it will be shared
by the upcoming mpc83xx family as well.
20 years ago
d9b94f28a4
* Patch by Jon Loeliger, 2005-05-05
...
Implemented support for MPC8548CDS board.
Added DDR II support based on SPD values for MPC85xx boards.
This roll-up patch also includes bugfies for the previously
published patches:
DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
20 years ago
288693abe1
* Patch by Jon Loeliger, 2005-Feb-10
...
Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
20 years ago
7202d43dde
* Patch by Jon Loeliger, Kumar Gala, 2005-02-08
...
For MPC85xxCDS:
Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
for faster flash parts.
Add documentation for BR/OR for FLASH.
20 years ago
d65cfe89ec
* Patch by Jon Loeliger 2005-02-08
...
Determine L2 Cache size dynamically on 85XX boards.
20 years ago
9c4c5ae3e1
* Patch by Jon Loeliger, Kumar Gala 2005-02-08
...
- Convert the CPM2 based functionality to use new CONFIG_CPM2
option rather than a myriad of CONFIG_MPC8560-like variants.
Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
Eliminates the CONFIG_MPC8560 option entirely. Distributes the
new CONFIG_CPM2 option to each 8260 board.
20 years ago
2d5df63e4f
Patch by Jon Loeliger, 20 Jul 2005:
...
Add missing PCI IO port definitions.
author Kumar Gala <kumar.gala@freescale.com> Wed, 20 Jul 2005 15:39:52 -0500
committer Jon Loeliger <jdl@freescale.com> Wed, 20 Jul 2005 15:39:52 -0500
20 years ago
1a79473bde
Add missing CHANGELOG entry.
20 years ago
08abe15850
Add CompactFlash support for HMI1001 board.
20 years ago
ee073a558b
Adjust printed board ID for LWMON board.
20 years ago
9c998aa831
Fix low-level OHCI transfers for ARM920t and MPC5xxx
...
A new, Windows compatible init sequence was also backported from Linux 2.6,
but disabled with #undef NEW_INIT_SEQ as it wouldn't change the behaviour
of the memopry sticks we tested. Maybe it's not relevant for mass storage
devices. For recerence, see file common/usb.c, function usb_new_device(),
section #ifdef NEW_INIT_SEQ.
20 years ago
f530187dbd
Add new argument format for flash commands to allow for usage like
...
"erase $(addr) +$(filesize)", i. e. a size argument can be used and
U-Boot will automaticially find the end of the corresponding sector.
20 years ago
3bb9cec962
Fix file permissions
20 years ago
cd5b2b9941
* Patch by Stefan Roese, 5 Jul 2005:
...
Update uc100 board PHY setup
20 years ago
88804d19e2
* Patch by Detlev Zundel, 30 Jun 2005:
...
Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
20 years ago
3c71f3e8aa
* Patch by Stefan Roese, 1 Jul 2005:
...
Fix PHY address for CATcenter board (now correct!)
20 years ago
bf41886f9d
* Patch by Stefan Roese, 30 Jun 2005:
...
Fix PHY addresses for PPChameleon and CATcenter boards
Change MAINTAINER for most esd boards
20 years ago
342717f72a
* Fix baudrate calculation problem on MPC5200 systems
...
* Add MPC8220 boards to MAKEALL script
* Add EEPROM and RTC support for HMI1001 board
* Patch by Detlev Zundel, 20 Jun 2005:
Fix initialization of low active GPIO pins on inka4x0 board
20 years ago
024447b186
Enable redundant environment, disable HW flash protection of HMI1001 board
20 years ago
b2532eff87
* Patch by Travis Sawyer, 10 Jun 2005:
...
Initialize allocated dev and private hw structures
after their respective allocation in 440gx_enet.c
* Patch by Steven Scholz, 10 Jun 2005:
Fix byteorder problems with second argument of "bootm" with
standalone images;
20 years ago
a87589da74
* Add support for HMI1001 board
...
* Disable "date" and "sntp" commands on TQM866M which has no RTC
20 years ago
51152c173d
Fix watchdog reset problems on LWMON board
20 years ago
ba91e26a19
Patch by Juergen Selent, 17 May 2005:
...
Add support for Funkwerk VoVPN gateway module.
20 years ago
2eab48f511
* Extend burst mode RAM test program to take a loop count
...
(0 = infinite)
* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
those boards that use it.
20 years ago
16b013e750
Patch by Greg Ungerer, 19 May 2005:
...
add support for the OpenGear CM4008 board
20 years ago
121fc64022
Patch by Greg Ungerer, 19 May 2005:
...
add support for the OpenGear CM4008 board
20 years ago
3a574cbe72
* Patch by Greg Ungerer, 19 May 2005:
...
add support for the KS8695P (ARM 922 based) CPU
* Patch by Steven Scholz, 19 May 2005:
Add support for CONFIG_SERIAL_TAG on ARM boards
20 years ago
7680c140af
Add PCI support for Sorcery board.
...
Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
20 years ago
c01766307c
Fix compile problems caused by new burst mode SDRAM test;
...
make port pins to trigger logic analyzer configurable
20 years ago
343117bf12
Fix timer handling on MPC85xx systems
20 years ago
9dd41a7b0c
* Fix debug code in omap5912osk flash driver
...
* Add support for MPC8247 based "IDS8247" board.
20 years ago
d44e14b5fc
Add support for 2 x TSEC interfaces on the TQM8540 board.
20 years ago
ed16fefcba
On LWMON we must use the watchdog to reset the board as the CPU
...
genereated HRESET pulse is too short to reset the external circuitry.
20 years ago
931da93e0f
Add test tool to exercise SDRAM accesses in burst mode
...
(as standalone program, MPC8xx/PowerPC only)
20 years ago
412babe304
It's better to handle LZO and LZARI compression mdoes for JFFS2 with
...
a single #define.
20 years ago
60fc6cbbb7
Increase CFG_MONITOR_LEN for Rattler board to match actual code size.
20 years ago
07cc099941
Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
...
March 13, 2005); new configuration options CONFIG_JFFS2_LZO and
CONFIG_JFFS2_LZARI are added. Both are undefined by default.
20 years ago
cf8bc5773c
Fix problem with symbolic links in JFFS2 code.
20 years ago
a710d4be80
Use linker ASSERT statement to prevent undetected overlapping of
...
sections on PPChameleon board; other boards might use this, too.
20 years ago
90dc67049d
README: add explanation about patch policy
...
net/net.c: fix indentation
20 years ago
434cf850a4
* Patch by Stefan Roese, 03 May 2005:
...
Update for P3G4
Fix problems in cmd_universe.c
* Patch by Matthias Fuchs, 03 May 2005:
Added missing variable declaration in cmd_nand.c
Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
20 years ago
81b83c9ecc
* Patch by Matthias Fuchs, 03 May 2005:
...
Added missing variable declaration in cmd_nand.c
Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
20 years ago
dcb2f95a60
* Patch by Stefan Roese, 03 May 2005:
...
Update for P3G4
Fix problems in cmd_universe.c
20 years ago
9f709b6cee
Fix INKA4x0: use CS1 as gpio_wkup_6 output
20 years ago
a63109281a
Fix bug in the SDRAM initialization code for canmb, IceCube and
...
PM520 boards.
Fix PHY address for canmb board.
20 years ago
7cc1438d43
get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
20 years ago
ec0ca73190
Cleanup serial console baudrate calculation on AT91RM9200
20 years ago
b2323ea6f9
Auto-size RAM on canmb board.
...
Cleanup.
20 years ago
fddae7b811
* Patch by Matthias Fuchs, 18 Apr 2005:
...
Make PCI target address spaces on PMC405 and CPCI405 boards
configurable via environment variables
20 years ago
5e5f9ed254
Add support for canmb board
20 years ago
Jon Loeliger
Wolfgang Denk
Wolfgang Denk
stroese
wdenk