ba91e26a19
Patch by Juergen Selent, 17 May 2005:
...
Add support for Funkwerk VoVPN gateway module.
20 years ago
2eab48f511
* Extend burst mode RAM test program to take a loop count
...
(0 = infinite)
* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
those boards that use it.
20 years ago
3a574cbe72
* Patch by Greg Ungerer, 19 May 2005:
...
add support for the KS8695P (ARM 922 based) CPU
* Patch by Steven Scholz, 19 May 2005:
Add support for CONFIG_SERIAL_TAG on ARM boards
20 years ago
7680c140af
Add PCI support for Sorcery board.
...
Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
20 years ago
c01766307c
Fix compile problems caused by new burst mode SDRAM test;
...
make port pins to trigger logic analyzer configurable
20 years ago
343117bf12
Fix timer handling on MPC85xx systems
20 years ago
9dd41a7b0c
* Fix debug code in omap5912osk flash driver
...
* Add support for MPC8247 based "IDS8247" board.
20 years ago
d44e14b5fc
Add support for 2 x TSEC interfaces on the TQM8540 board.
20 years ago
ed16fefcba
On LWMON we must use the watchdog to reset the board as the CPU
...
genereated HRESET pulse is too short to reset the external circuitry.
20 years ago
931da93e0f
Add test tool to exercise SDRAM accesses in burst mode
...
(as standalone program, MPC8xx/PowerPC only)
20 years ago
412babe304
It's better to handle LZO and LZARI compression mdoes for JFFS2 with
...
a single #define.
20 years ago
60fc6cbbb7
Increase CFG_MONITOR_LEN for Rattler board to match actual code size.
20 years ago
07cc099941
Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
...
March 13, 2005); new configuration options CONFIG_JFFS2_LZO and
CONFIG_JFFS2_LZARI are added. Both are undefined by default.
20 years ago
cf8bc5773c
Fix problem with symbolic links in JFFS2 code.
20 years ago
a710d4be80
Use linker ASSERT statement to prevent undetected overlapping of
...
sections on PPChameleon board; other boards might use this, too.
20 years ago
434cf850a4
* Patch by Stefan Roese, 03 May 2005:
...
Update for P3G4
Fix problems in cmd_universe.c
* Patch by Matthias Fuchs, 03 May 2005:
Added missing variable declaration in cmd_nand.c
Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
20 years ago
9f709b6cee
Fix INKA4x0: use CS1 as gpio_wkup_6 output
20 years ago
a63109281a
Fix bug in the SDRAM initialization code for canmb, IceCube and
...
PM520 boards.
Fix PHY address for canmb board.
20 years ago
7cc1438d43
get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
20 years ago
ec0ca73190
Cleanup serial console baudrate calculation on AT91RM9200
20 years ago
b2323ea6f9
Auto-size RAM on canmb board.
...
Cleanup.
20 years ago
fddae7b811
* Patch by Matthias Fuchs, 18 Apr 2005:
...
Make PCI target address spaces on PMC405 and CPCI405 boards
configurable via environment variables
20 years ago
5e5f9ed254
Add support for canmb board
20 years ago
4c2a366db3
* Patch by Stefan Roese, 13 Apr 2005:
...
Update for esd apc405
20 years ago
2a8af18738
* Fixes for TQM8560 board:
...
- fix clock rates
- remove debug messages
- fix flash sector protection
* Patch by Steven Scholz, 07 Apr 2005:
Fix warning in cpu/arm920t/at91rm9200/i2c.c
20 years ago
b77fad3b25
* Patch by Steven Scholz, 07 Apr 2005:
...
Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
* Patch by Steven Scholz, 07 Apr 2005:
Fix compiler warning in altera.c
* Patch by Ladislav Michl, 06 Apr 2005:
Fix voiceblue configuration.
20 years ago
7ec2550238
* Patch by Stefan Roese, 06 Apr 2005:
...
Updates for OCOTEA board:
- Changed U-Boot size from 512kByte to 256kByte
- Fixed flash driver to support boot from soldered user flash
- Added README for switch from PIBS firmware to U-Boot
20 years ago
a85f9f21aa
Patch by Steven Scholz, 06 Apr 2005:
...
- creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
- moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
20 years ago
20787e23b8
* Patches by Robert Whaley, 29 Nov 2004:
...
- update the pxa-regs.h file for PXA27x chips
- add PXA27x based ADSVIX board
- add support for MMC on PXA27x processors
* Patch by Andrew E. Mileski, 28 Nov 2004:
Fix PPC4xx SPD SDRAM detection bug
* Patch by Hiroshi Ito, 26 Nov 2004:
Fix logic of "test -z" and "test -n" commands
20 years ago
3c2b3d454d
* Patch by Ladislav Michl, 05 Apr 2005:
...
Add support for VoiceBlue board.
* Patch by Ladislav Michl, 05 Apr 2005:
Fix netboot_common() prototypes.
* Cleanup.
20 years ago
b304c96871
Patches by Steven Scholz, 05 Apr 2005:
...
- Use i.MX watchdog timer for reset_cpu()
- Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
(now in interupts.c)
20 years ago
12b43d515c
Add support for MPC8220 based "sorcery" board.
20 years ago
f5c5ef4a1f
Add support for TQM8560 board
20 years ago
3dd7f0f0ca
* Add FEC support for TQM8540 board.
...
Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
* Patch by Martin Krause, 04 Apr 2005:
Update default configuration for CMC_PU2 board.
20 years ago
8aa1a2d115
Patch by Steven Scholz, 4 Apr 2005:
...
- remove all references to CONFIG_INIT_CRITICAL for ARM based boards
- introduce two new configuration options instead:
CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
20 years ago
ba83a30765
Patch by Steven Scholz, 04 Apr 2005:
...
Make sure that MDIO clock does not exceed 2.5 MHz on AT91
20 years ago
101e8dfa2a
Fix timer code for ARM systems: make sure that udelay() does not
...
reset timers so it's save to use udelay() in timeout code.
20 years ago
50712ba16e
* Patch by Mathias Küster, 23 Nov 2004:
...
add udelay support for the mcf5282 cpu
* Patch by Tolunay Orkun, 16 November 2004:
fix incorrect onboard Xilinx CPLD base address
20 years ago
901787d6e8
Patch by Jerry Van Baren, 08 Nov 2004:
...
- Add low-boot option for MPC8260ADS board (if lowboot is selected,
the jumper for the HRCW source should select flash. If lowboot is
not selected, the jumper for the HRCW source should select the
BCSR.
- change default load base address to 0x00400000
20 years ago
8b0bfc6804
* Patch by Yuli Barcohen, 08 Nov 2004:
...
Add support for Analogue & Micro Rattler boards.
Tested on Rattler8248.
* Patch by Andre Renaud, 08 Nov 2004:
Fix watchdog support in common/lcd.c
* Patch by Marc Leeman, 05 Nov 2003:
Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
bug only affects the XPC8245 processors
20 years ago
384cc68744
Patches by Josef Wagner, 29 Oct 2004:
...
- Add support for MicroSys CPU87 board
- Add support for MicroSys PM854 board
20 years ago
c1a11c19ec
* Patch by Scott McNutt, 01 Nov 2004:
...
Add missing NIOS/NIOS2 support for "iminfo" command
* Patch by Detlev Zundel, 29 Oct 2004:
Add missing NIOS/NIOS2 support for "mkimage" tool.
20 years ago
6315349202
Patch by David Adair, 27 Oct 2004:
...
Add missing 440GX SDRAM Controller reset
20 years ago
3ec924a3cb
Patch by Steven Scholz, 25 Oct 2004:
...
Declare reset_cpu() in include/common.h instead locally
20 years ago
756f586a73
* Patch by Yusdi Santoso, 22 Oct 2004:
...
- Add support for HIDDEN_DRAGON board
- fix endianess problem in driver/rtl1839.c
* Patch by Allen Curtis, 21 Oct 2004:
support multiple serial ports
20 years ago
b1bf6f2c9b
* Patch by Richard Klingler, 03 Apr 2005:
...
Add call to eth_halt() in net/net.c when called functions fail
after eth_init() has been called.
* Patch by Sam Song, 3 April 2005:
- Update README.Netconsole
- Update README
20 years ago
86c9888207
Patch by Steven Scholz, 03 Apr 2005:
...
- create SoC specific directories include/asm-arm/arch-imx and
include/asm-arm/arch-s3c24x0
20 years ago
400558b561
Prepare for SoC rework of ARM code:
...
- rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
- rename memsetup into lowlevel_init (function name and source files)
20 years ago
414eec35e3
Fix problems with SNTP support;
...
enable SNTP support in some boards.
20 years ago
be6b6e4e2d
Patch by Martin Krause, 01 Apr 2005:
...
Add automatic HW detection for CMC_PU2 and CMC_BASIC
20 years ago
wdenk
stroese