upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Jean-Christophe PLAGNIOL-VILLARD 52cb4d4fb3 stdio/device: rework function naming convention ... So far the console API uses the following naming convention: ======Extract====== typedef struct device_t; int device_register (device_t * dev); int devices_init (void); int device_deregister(char *devname); struct list_head* device_get_list(void); device_t* device_get_by_name(char* name); device_t* device_clone(device_t *dev); ======= which is too generic and confusing. Instead of using device_XX and device_t we change this into stdio_XX and stdio_dev This will also allow to add later a generic device mechanism in order to have support for multiple devices and driver instances. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Edited commit message. Signed-off-by: Wolfgang Denk <wd@denx.de>		16 years ago
..
A3000.h	…
ADCIOP.h	…
ADNPESC1.h	Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ	16 years ago
ADNPESC1_base_32.h	…
ADS860.h	…
AMX860.h	…
AP1000.h	…
APC405.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
AR405.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	16 years ago
ASH405.h	ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files	16 years ago
ATUM8548.h	…
Adder.h	…
AdderUSB.h	…
Alaska8220.h	Separate mtdparts command from jffs2	16 years ago
AmigaOneG3SE.h	stdio/device: rework function naming convention	16 years ago
B2.h	arm: remove cpu_init	16 years ago
BAB7xx.h	Separate mtdparts command from jffs2	16 years ago
BC3450.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
BMW.h	…
CANBT.h	…
CATcenter.h	Separate mtdparts command from jffs2	16 years ago
CCM.h	…
CMS700.h	4xx: Remove binary cpld bitstream from CMS700 board	16 years ago
CPC45.h	…
CPCI2DP.h	ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files	16 years ago
CPCI405.h	ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files	16 years ago
CPCI405AB.h	ppc4xx: Abort autoboot only by space key on CPCI405 boards	16 years ago
CPCI405DT.h	ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files	16 years ago
CPCI750.h	74xx_7xx: CPCI750: Add CPCI adapter/target support	16 years ago
CPCI4052.h	ppc4xx: Abort autoboot only by space key on CPCI405 boards	16 years ago
CPCIISER4.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	16 years ago
CPU86.h	…
CPU87.h	…
CRAYL1.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	16 years ago
CU824.h	…
DASA_SIM.h	ppc4xx: Update TEXT_BASE for DASA_SIM boards	16 years ago
DB64360.h	Separate mtdparts command from jffs2	16 years ago
DB64460.h	Separate mtdparts command from jffs2	16 years ago
DK1C20.h	Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ	16 years ago
DK1C20_safe_32.h	…
DK1C20_standard_32.h	…
DK1S10.h	Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ	16 years ago
DK1S10_mtx_ldk_20.h	…
DK1S10_safe_32.h	…
DK1S10_standard_32.h	…
DP405.h	4xx: Remove binary cpld bitstream from DP405 board	16 years ago
DU405.h	i2c: Remove deprecated individual i2c commands	16 years ago
DU440.h	i2c: Remove deprecated individual i2c commands	16 years ago
EB+MCF-EV123.h	…
ELPPC.h	Separate mtdparts command from jffs2	16 years ago
ELPT860.h	…
EP1C20.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
EP1S10.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
EP1S40.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
EP88x.h	…
ERIC.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	16 years ago
ESTEEM192E.h	…
ETX094.h	…
EVB64260.h	…
EXBITGEN.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	16 years ago
FADS823.h	…
FADS850SAR.h	…
FADS860T.h	…
FLAGADM.h	8xx, icache: enabling ICache not before running from RAM	16 years ago
FPS850L.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
FPS860L.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
G2000.h	ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files	16 years ago
GEN860T.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
GENIETV.h	…
GTH.h	…
HH405.h	ppc4xx: Use correct io accessors for esd 405/440 boards	16 years ago
HIDDEN_DRAGON.h	remove _IO_BASE and KSEG1ADDR from board configuration files	16 years ago
HMI10.h	…
HUB405.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	16 years ago
IAD210.h	boards: move board_get_enetaddr() into board-specific init	16 years ago
ICU862.h	…
IDS8247.h	ids8247: Remove legacy NAND defines	16 years ago
IP860.h	8xx, icache: enabling ICache not before running from RAM	16 years ago
IPHASE4539.h	…
ISPAN.h	…
IVML24.h	…
IVMS8.h	…
IceCube.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	16 years ago
JSE.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	16 years ago
KAREF.h	…
KUP4K.h	…
KUP4X.h	…
LANTEC.h	Separate mtdparts command from jffs2	16 years ago
M5235EVB.h	ColdFire: Provide gzip image size V2 & V3 platforms	16 years ago
M5249EVB.h	…
M5253DEMO.h	remove _IO_BASE and KSEG1ADDR from board configuration files	16 years ago
M5253EVBE.h	remove _IO_BASE and KSEG1ADDR from board configuration files	16 years ago
M5271EVB.h	Coldfire: M5271EVB: Board header update (dependencies)	16 years ago
M5272C3.h	…
M5275EVB.h	ColdFire: Provide gzip image size V2 & V3 platforms	16 years ago
M5282EVB.h	…
M5329EVB.h	ColdFire: Provide gzip image size V2 & V3 platforms	16 years ago
M5373EVB.h	ColdFire: Provide gzip image size V2 & V3 platforms	16 years ago
M5475EVB.h	…
M5485EVB.h	…
M52277EVB.h	ColdFire: Provide gzip image size V2 & V3 platforms	16 years ago
M53017EVB.h	ColdFire: Provide gzip image size V2 & V3 platforms	16 years ago
M54451EVB.h	…
M54455EVB.h	remove _IO_BASE and KSEG1ADDR from board configuration files	16 years ago
MBX.h	…
MBX860T.h	ppc: cleanup compiler errors/warnings	16 years ago
METROBOX.h	…
MHPC.h	Separate mtdparts command from jffs2	16 years ago
MIP405.h	stdio/device: rework function naming convention	16 years ago
ML2.h	Separate mtdparts command from jffs2	16 years ago
MOUSSE.h	…
MPC86xADS.h	…
MPC832XEMDS.h	mpc83xx: increase MONITOR_LEN to offset growing pains	16 years ago
MPC837XEMDS.h	mpc83xx: MPC837XEMDS: Fixup eSDHC nodes in device tree	16 years ago
MPC837XERDB.h	mpc83xx: MPC837XERDB: Add support for FSL eSDHC	16 years ago
MPC885ADS.h	…
MPC8260ADS.h	MPC8260ADS: Add nfsboot/ramboot to default environment.	16 years ago
MPC8266ADS.h	Separate mtdparts command from jffs2	16 years ago
MPC8313ERDB.h	mpc83xx: increase MONITOR_LEN to offset growing pains	16 years ago
MPC8315ERDB.h	mpc83xx: MPC8315ERDB: Use hwconfig for board type selection	16 years ago
MPC8323ERDB.h	mpc83xx: increase MONITOR_LEN to offset growing pains	16 years ago
MPC8349EMDS.h	mpc83xx: increase MONITOR_LEN to offset growing pains	16 years ago
MPC8349ITX.h	mpc83xx: increase MONITOR_LEN to offset growing pains	16 years ago
MPC8360EMDS.h	mpc83xx: increase MONITOR_LEN to offset growing pains	16 years ago
MPC8360ERDK.h	mpc83xx: set 64BIT_VSPRINTF for boards using nand_util	16 years ago
MPC8536DS.h	remove _IO_BASE and KSEG1ADDR from board configuration files	16 years ago
MPC8540ADS.h	85xx: Use common LSDMR defines from asm/fsl_lbc.h	16 years ago
MPC8540EVAL.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
MPC8541CDS.h	85xx: Use common LSDMR defines from asm/fsl_lbc.h	16 years ago
MPC8544DS.h	remove _IO_BASE and KSEG1ADDR from board configuration files	16 years ago
MPC8548CDS.h	85xx: Use common LSDMR defines from asm/fsl_lbc.h	16 years ago
MPC8555CDS.h	85xx: Use common LSDMR defines from asm/fsl_lbc.h	16 years ago
MPC8560ADS.h	85xx: Use common LSDMR defines from asm/fsl_lbc.h	16 years ago
MPC8568MDS.h	i2c: Remove deprecated individual i2c commands	16 years ago
MPC8569MDS.h	85xx: Add UEC6 and UEC8 at SGMII mode for MPC8569MDS	16 years ago
MPC8572DS.h	remove _IO_BASE and KSEG1ADDR from board configuration files	16 years ago
MPC8610HPCD.h	stdio/device: rework function naming convention	16 years ago
MPC8641HPCN.h	stdio/device: rework function naming convention	16 years ago
MUSENKI.h	rename CFG_ macros to CONFIG_SYS	16 years ago
MVBC_P.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
MVBLM7.h	remove _IO_BASE and KSEG1ADDR from board configuration files	16 years ago
MVBLUE.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
MVS1.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
MigoR.h	sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV	16 years ago
NC650.h	Separate mtdparts command from jffs2	16 years ago
NETPHONE.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
NETTA.h	Separate mtdparts command from jffs2	16 years ago
NETTA2.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
NETVIA.h	…
NSCU.h	…
NX823.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
OCRTC.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	16 years ago
ORSG.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	16 years ago
OXC.h	…
P3G4.h	…
P2020DS.h	remove _IO_BASE and KSEG1ADDR from board configuration files	16 years ago
PATI.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
PCI405.h	ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files	16 years ago
PCI5441.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
PCIPPC2.h	…
PCIPPC6.h	…
PIP405.h	stdio/device: rework function naming convention	16 years ago
PK1C20.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
PLU405.h	ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files	16 years ago
PM520.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	16 years ago
PM826.h	…
PM828.h	…
PM854.h	8xxx: Break out DMA code to a common file	16 years ago
PM856.h	8xxx: Break out DMA code to a common file	16 years ago
PMC405.h	4xx: Remove binary cpld bitstream from PMC405 board	16 years ago
PMC440.h	i2c: Remove deprecated individual i2c commands	16 years ago
PN62.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
PPChameleonEVB.h	Separate mtdparts command from jffs2	16 years ago
QS823.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
QS850.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
QS860T.h	…
R360MPI.h	Separate mtdparts command from jffs2	16 years ago
RBC823.h	Separate mtdparts command from jffs2	16 years ago
RPXClassic.h	boards: move board_get_enetaddr() into board-specific init	16 years ago
RPXlite.h	…
RPXlite_DW.h	…
RPXsuper.h	…
RRvision.h	…
Rattler.h	Separate mtdparts command from jffs2	16 years ago
SBC8540.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
SCM.h	…
SIMPC8313.h	mpc83xx: set 64BIT_VSPRINTF for boards using nand_util	16 years ago
SL8245.h	…
SM850.h	…
SMN42.h	arm: cleanup remaining CONFIG_INIT_CRITICAL	16 years ago
SPD823TS.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
SX1.h	arm925t: Fix CONFIG_SYS_HZ to 1000	16 years ago
SXNI855T.h	Separate mtdparts command from jffs2	16 years ago
Sandpoint8240.h	…
Sandpoint8245.h	…
TASREG.h	…
TB5200.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
TK885D.h	…
TOP860.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
TOP5200.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	16 years ago
TQM85xx.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
TQM823L.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
TQM823M.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
TQM834x.h	83xx: Replace CONFIG_MPC83[0-9]X with MPC83[0-9]x	16 years ago
TQM850L.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
TQM850M.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
TQM855L.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
TQM855M.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
TQM860L.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
TQM860M.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
TQM862L.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
TQM862M.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
TQM866M.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
TQM885D.h	Enable ext2 support for TQM8xxL/M based boards	16 years ago
TQM5200.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
TQM8260.h	TQM8260: fix locations of kernel and ramdisk images in flash	16 years ago
TQM8272.h	…
Total5200.h	mpc52xx: Get rid of board-specific #ifdef's in cpu/mpc5xxx/ide.c	16 years ago
VCMA9.h	stdio/device: rework function naming convention	16 years ago
VOH405.h	ppc4xx: Remove CONFIG_SYS_IGNORE_405_UART_ERRATA_59 from config files	16 years ago
VOM405.h	4xx: Remove binary cpld bitstream from VOM405 board	16 years ago
VoVPN-GW.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
W7OLMC.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	16 years ago
W7OLMG.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	16 years ago
WUH405.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	16 years ago
XPEDITE1K.h	boards: move board_get_enetaddr() into board-specific init	16 years ago
XPEDITE5170.h	86xx: XPedite5170 board support	16 years ago
XPEDITE5200.h	i2c: Remove deprecated individual i2c commands	16 years ago
XPEDITE5370.h	i2c: Remove deprecated individual i2c commands	16 years ago
Yukon8220.h	…
ZPC1900.h	…
ZUMA.h	Separate mtdparts command from jffs2	16 years ago
acadia.h	…
actux1.h	Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ	16 years ago
actux2.h	Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ	16 years ago
actux3.h	Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ	16 years ago
actux4.h	Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ	16 years ago
aev.h	…
afeb9260.h	at91sam9/at91cap: fix CONFIG_SYS_HZ to 1000	16 years ago
alpr.h	…
amcc-common.h	ppc4xx: Add Sequoia RAM-booting target	16 years ago
ap325rxa.h	sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV	16 years ago
apollon.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
aria.h	aria: add JFFS2 and MTDPARTS support; adjust flash map	16 years ago
armadillo.h	arm: cleanup remaining CONFIG_INIT_CRITICAL	16 years ago
assabet.h	arm: clean cache management	16 years ago
at91cap9adk.h	at91: move cpu name define to arm/arch/ cpu header	16 years ago
at91rm9200dk.h	at91rm9200: move serial driver to drivers/serial	16 years ago
at91rm9200ek.h	i2c: Remove deprecated individual i2c commands	16 years ago
at91sam9m10g45ek.h	at91: Introduction of at91sam9g45 SOC.	16 years ago
at91sam9rlek.h	at91: move cpu name define to arm/arch/ cpu header	16 years ago
at91sam9260ek.h	at91: move cpu name define to arm/arch/ cpu header	16 years ago
at91sam9261ek.h	at91: Introduction of at91sam9g10 SOC.	16 years ago
at91sam9263ek.h	at91sam9263ek: add nor flash support	16 years ago
atc.h	…
atngw100.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
atstk1002.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
atstk1003.h	…
atstk1004.h	…
atstk1006.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
bamboo.h	…
barco.h	…
bf518f-ezbrd.h	Blackfin: fix SPI flash speed define name	16 years ago
bf526-ezbrd.h	Blackfin: fix SPI flash speed define name	16 years ago
bf527-ezkit.h	Blackfin: fix SPI flash speed define name	16 years ago
bf533-ezkit.h	Blackfin: convert specific pre/post config headers to common method	16 years ago
bf533-stamp.h	Blackfin: fix SPI flash speed define name	16 years ago
bf537-minotaur.h	Blackfin: fix SPI flash speed define name	16 years ago
bf537-pnav.h	Blackfin: fix SPI flash speed define name	16 years ago
bf537-srv1.h	Blackfin: fix SPI flash speed define name	16 years ago
bf537-stamp.h	mtd: nand: new base driver for memory mapped nand devices	16 years ago
bf538f-ezkit.h	Blackfin: fix SPI flash speed define name	16 years ago
bf548-ezkit.h	Blackfin: fix SPI flash speed define name	16 years ago
bf561-ezkit.h	Blackfin: unify u-boot linker scripts	16 years ago
bfin_adi_common.h	mtd: nand: new base driver for memory mapped nand devices	16 years ago
blackstamp.h	Blackfin: blackstamp: update spi flash settings	16 years ago
bubinga.h	i2c: Update references to individual i2c commands	16 years ago
c2mon.h	…
canmb.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	16 years ago
canyonlands.h	ppc4xx: Fix FDT EBC mappings on Canyonlands	16 years ago
cerf250.h	pxa: move serial driver to drivers/serial	16 years ago
cm-bf527.h	Blackfin: convert specific pre/post config headers to common method	16 years ago
cm-bf533.h	Blackfin: convert specific pre/post config headers to common method	16 years ago
cm-bf537e.h	Blackfin: unify u-boot linker scripts	16 years ago
cm-bf548.h	Blackfin: convert specific pre/post config headers to common method	16 years ago
cm-bf561.h	Blackfin: cm-bf561: add example settings for EXT-BF5xx-USB-ETH2 add-on	16 years ago
cm41xx.h	ks8695: move serial driver to drivers/serial	16 years ago
cm4008.h	ks8695: move serial driver to drivers/serial	16 years ago
cm5200.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
cmc_pu2.h	at91rm9200: move serial driver to drivers/serial	16 years ago
cmi_mpc5xx.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
cobra5272.h	…
cogent_common.h	…
cogent_mpc8xx.h	…
cogent_mpc8260.h	…
cpci5200.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	16 years ago
cradle.h	pxa: move serial driver to drivers/serial	16 years ago
csb226.h	pxa: move serial driver to drivers/serial	16 years ago
csb272.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	16 years ago
csb472.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	16 years ago
csb637.h	at91rm9200: move serial driver to drivers/serial	16 years ago
davinci_dm355evm.h	dm355/pm9261: add missing CONFIG_NET_MULTI	16 years ago
davinci_dvevm.h	Switched davinci_emac Ethernet driver to use newer API	16 years ago
davinci_schmoogie.h	Switched davinci_emac Ethernet driver to use newer API	16 years ago
davinci_sffsdr.h	Switched davinci_emac Ethernet driver to use newer API	16 years ago
davinci_sonata.h	Switched davinci_emac Ethernet driver to use newer API	16 years ago
dbau1x00.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
debris.h	Separate mtdparts command from jffs2	16 years ago
delta.h	pxa: move serial driver to drivers/serial	16 years ago
digsy_mtc.h	digsy mtc: Add description to GPIO initial configuration.	16 years ago
dnp1110.h	arm: clean cache management	16 years ago
eNET.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
eXalion.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
ebony.h	…
ep82xxm.h	…
ep7312.h	arm720t/clps7111: move serial driver to drivers/serial	16 years ago
ep8248.h	…
ep8260.h	Separate mtdparts command from jffs2	16 years ago
espt.h	sh: Add support ESPT-GIGA borad	16 years ago
evb4510.h	arm: clean cache management	16 years ago
favr-32-ezkit.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
fx12mm.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
gcplus.h	arm: cleanup remaining CONFIG_INIT_CRITICAL	16 years ago
gdppc440etx.h	ppc4xx: Add GDsys PowerPC 440 ETX board support.	16 years ago
gr_cpci_ax2000.h	…
gr_ep2s60.h	stdio/device: rework function naming convention	16 years ago
gr_xc3s_1500.h	…
grsim.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
grsim_leon2.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
gth2.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
gw8260.h	…
h2_p2_dbg_board.h	…
hammerhead.h	…
hcu4.h	…
hcu5.h	…
hermes.h	…
hmi1001.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	16 years ago
hymod.h	Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ	16 years ago
ibf-dsp561.h	Blackfin: unify u-boot linker scripts	16 years ago
idmr.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
impa7.h	arm720t/clps7111: move serial driver to drivers/serial	16 years ago
imx31_litekit.h	serial_mx31: allow it to work with mx27 too and rename to serial_mxc	16 years ago
imx31_phycore.h	serial_mx31: allow it to work with mx27 too and rename to serial_mxc	16 years ago
incaip.h	Separate mtdparts command from jffs2	16 years ago
inka4x0.h	powerpc/inka4x0: Remove left-over ide reset code.	16 years ago
innokom.h	pxa: move serial driver to drivers/serial	16 years ago
integratorap.h	integratorap/cp: use cfi driver	16 years ago
integratorcp.h	integratorap/cp: use cfi driver	16 years ago
ixdp425.h	Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ	16 years ago
ixdpg425.h	arm: timer and interrupt init rework	16 years ago
jupiter.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	16 years ago
katmai.h	i2c: Remove deprecated individual i2c commands	16 years ago
kb9202.h	at91rm9200: move serial driver to drivers/serial	16 years ago
keymile-common.h	i2c: Remove deprecated individual i2c commands	16 years ago
kilauea.h	ppc4xx: Disable POST memory test on NAND-booting Kilauea	16 years ago
km8xx.h	8xx: add support for new keymile kmsupx4 board.	16 years ago
kmeter1.h	mpc83xx: increase MONITOR_LEN to offset growing pains	16 years ago
kmsupx4.h	8xx: add support for new keymile kmsupx4 board.	16 years ago
korat.h	i2c: Remove deprecated individual i2c commands	16 years ago
kvme080.h	…
lart.h	arm: clean cache management	16 years ago
linkstation.h	…
logodl.h	pxa: move serial driver to drivers/serial	16 years ago
lpc2292sodimm.h	arm: cleanup remaining CONFIG_INIT_CRITICAL	16 years ago
lpd7a400-10.h	…
lpd7a400.h	lh7a40x: move serial driver to drivers/serial	16 years ago
lpd7a404-10.h	…
lpd7a404.h	lh7a40x: move serial driver to drivers/serial	16 years ago
luan.h	…
lubbock.h	pxa: move serial driver to drivers/serial	16 years ago
lwmon.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
lwmon5.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
m501sk.h	at91rm9200: move serial driver to drivers/serial	16 years ago
makalu.h	…
mcc200.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	16 years ago
mcu25.h	…
mecp5123.h	MPC512x: fix typo in comment listing the NAND driver name	16 years ago
mecp5200.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	16 years ago
meesc.h	at91: Add esd gmbh MEESC board support	16 years ago
mgcoge.h	powerpc: common updates for keymile boards	16 years ago
mgsuvd.h	8xx, mgsuvd: rename board to a more generic name	16 years ago
microblaze-generic.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
mimc200.h	Merge branch 'mimc200' into next	16 years ago
ml300.h	…
ml507.h	…
modnet50.h	netarm: move serial driver to drivers/serial	16 years ago
motionpro.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
mp2usb.h	stdio/device: rework function naming convention	16 years ago
mpc5121ads.h	mpc5121ads: add JFFS2 and MTDPARTS support; adjust flash map	16 years ago
mpc7448hpc2.h	remove _IO_BASE and KSEG1ADDR from board configuration files	16 years ago
mpr2.h	sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV	16 years ago
ms7720se.h	sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV	16 years ago
ms7722se.h	sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV	16 years ago
ms7750se.h	sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV	16 years ago
muas3001.h	…
mucmc52.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	16 years ago
munices.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	16 years ago
mx1ads.h	imx: move serial driver to drivers/serial	16 years ago
mx1fs2.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
mx31ads.h	serial_mx31: allow it to work with mx27 too and rename to serial_mxc	16 years ago
mx31pdk.h	MX31: Add NAND SPL boot support to i.MX31 PDK board.	16 years ago
neo.h	…
netstal-common.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	16 years ago
netstar.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
nhk8815.h	arm nomadik: use 1000 as HZ value and rewrite timer code	16 years ago
ns9750dev.h	Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ	16 years ago
o2dnt.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	16 years ago
ocotea.h	…
omap3_beagle.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
omap3_evm.h	OMAP3EVM: Set default bootfile	16 years ago
omap3_overo.h	OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000	16 years ago
omap3_pandora.h	OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000	16 years ago
omap3_zoom1.h	ZOOM1 Remove more legacy NAND defines.	16 years ago
omap3_zoom2.h	ZOOM2 Define GPIO banks used.	16 years ago
omap730.h	…
omap730p2.h	OMAP: rename timer divisor	16 years ago
omap1510.h	…
omap1510inn.h	arm925t: Fix CONFIG_SYS_HZ to 1000	16 years ago
omap1610h2.h	OMAP: rename timer divisor	16 years ago
omap1610inn.h	OMAP: rename timer divisor	16 years ago
omap2420h4.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
omap5912osk.h	OMAP: rename timer divisor	16 years ago
p3mx.h	…
p3p440.h	…
pb1x00.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
pcm030.h	board support patch for phyCORE-MPC5200B-tiny	16 years ago
pcs440ep.h	…
pcu_e.h	8xx, icache: enabling ICache not before running from RAM	16 years ago
pdnb3.h	arm: timer and interrupt init rework	16 years ago
pf5200.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	16 years ago
pleb2.h	pxa: move serial driver to drivers/serial	16 years ago
pm9261.h	dm355/pm9261: add missing CONFIG_NET_MULTI	16 years ago
pm9263.h	pm9263: use macro instead of hardcode value for the lowlevel_init	16 years ago
ppmc7xx.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
ppmc8260.h	…
purple.h	…
pxa255_idp.h	pxa: move serial driver to drivers/serial	16 years ago
qemu-mips.h	…
qong.h	serial_mx31: allow it to work with mx27 too and rename to serial_mxc	16 years ago
quad100hd.h	…
quantum.h	…
r2dplus.h	Merge branch 'master' of /home/wd/git/u-boot/custodians	16 years ago
r7780mp.h	sh: Update pci config for Renesas r7780mp board	16 years ago
redwood.h	…
rmu.h	rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared	16 years ago
rsdproto.h	…
rsk7203.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
sacsng.h	i2c: Update references to individual i2c commands	16 years ago
sbc405.h	Enable CONFIG_NET_MULTI on all remaining PPC4xx boards	16 years ago
sbc2410x.h	Fix e-mail address of Gary Jennejohn.	16 years ago
sbc8240.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
sbc8260.h	…
sbc8349.h	83xx: Replace CONFIG_MPC83[0-9]X with MPC83[0-9]x	16 years ago
sbc8548.h	85xx: Use common LSDMR defines from asm/fsl_lbc.h	16 years ago
sbc8560.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
sbc8641d.h	86xx: Cleanup MP support	16 years ago
sc3.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
sc520_cdp.h	Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ	16 years ago
sc520_spunk.h	Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ	16 years ago
sc520_spunk_rel.h	…
scb9328.h	Convert DM9000 driver for CONFIG_NET_MULTI	16 years ago
sequoia.h	ppc4xx: Add Sequoia RAM-booting target	16 years ago
sh7763rdp.h	sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV	16 years ago
sh7785lcr.h	sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIV	16 years ago
shannon.h	arm: clean cache management	16 years ago
smdk2400.h	Fix e-mail address of Gary Jennejohn.	16 years ago
smdk2410.h	Fix e-mail address of Gary Jennejohn.	16 years ago
smdk6400.h	nand_spl: read environment early, when booting from NAND using nand_spl	16 years ago
smmaco4.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
socrates.h	i2c: Remove deprecated individual i2c commands	16 years ago
sorcery.h	…
spc1920.h	…
spieval.h	…
stxgp3.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
stxssa.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
stxxtc.h	Add "source" command; prepare removal of "autoscr" command	16 years ago
suzaku.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
svm_sc8xx.h	…
taihu.h	i2c: Update references to individual i2c commands	16 years ago
taishan.h	…
tb0229.h	…
tcm-bf537.h	Blackfin: unify u-boot linker scripts	16 years ago
trab.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
trizepsiv.h	xscale: add support for the polaris board	16 years ago
uc100.h	…
uc101.h	net: removed board-specific CONFIGs from MPC5xxx FEC driver	16 years ago
utx8245.h	rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV	16 years ago
v5fx30teval.h	…
v37.h	Separate mtdparts command from jffs2	16 years ago
v38b.h	boards: move board_get_enetaddr() into board-specific init	16 years ago
vct.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
versatile.h	versatile: update config and merge to cfi flash driver	16 years ago
virtlab2.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
voiceblue.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
walnut.h	…
wepep250.h	pxa: move serial driver to drivers/serial	16 years ago
xaeniax.h	pxa: move serial driver to drivers/serial	16 years ago
xilinx-ppc.h	mtd: MTD related config header changes (mtdparts command)	16 years ago
xilinx-ppc405-generic.h	…
xilinx-ppc405.h	…
xilinx-ppc440-generic.h	…
xilinx-ppc440.h	…
xm250.h	pxa: move serial driver to drivers/serial	16 years ago
xsengine.h	pxa: move serial driver to drivers/serial	16 years ago
yosemite.h	…
yucca.h	…
zeus.h	…
zylonite.h	pxa: move serial driver to drivers/serial	16 years ago