upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/include/fsl_ddr_sdram.h

449 lines
13 KiB

/*
* Copyright 2008-2014 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* Version 2 as published by the Free Software Foundation.
*/
#ifndef FSL_DDR_MEMCTL_H
#define FSL_DDR_MEMCTL_H
/*
* Pick a basic DDR Technology.
*/
#include <ddr_spd.h>
#include <fsl_ddrc_version.h>
#define SDRAM_TYPE_DDR1 2
#define SDRAM_TYPE_DDR2 3
#define SDRAM_TYPE_LPDDR1 6
#define SDRAM_TYPE_DDR3 7
#define SDRAM_TYPE_DDR4 5
#define DDR_BL4 4 /* burst length 4 */
#define DDR_BC4 DDR_BL4 /* burst chop for ddr3 */
#define DDR_OTF 6 /* on-the-fly BC4 and BL8 */
#define DDR_BL8 8 /* burst length 8 */
#define DDR3_RTT_OFF 0
#define DDR3_RTT_60_OHM 1 /* RTT_Nom = RZQ/4 */
#define DDR3_RTT_120_OHM 2 /* RTT_Nom = RZQ/2 */
#define DDR3_RTT_40_OHM 3 /* RTT_Nom = RZQ/6 */
#define DDR3_RTT_20_OHM 4 /* RTT_Nom = RZQ/12 */
#define DDR3_RTT_30_OHM 5 /* RTT_Nom = RZQ/8 */
#define DDR2_RTT_OFF 0
#define DDR2_RTT_75_OHM 1
#define DDR2_RTT_150_OHM 2
#define DDR2_RTT_50_OHM 3
#if defined(CONFIG_SYS_FSL_DDR1)
#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (1)
typedef ddr1_spd_eeprom_t generic_spd_eeprom_t;
#ifndef CONFIG_FSL_SDRAM_TYPE
#define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR1
#endif
#elif defined(CONFIG_SYS_FSL_DDR2)
#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (3)
typedef ddr2_spd_eeprom_t generic_spd_eeprom_t;
#ifndef CONFIG_FSL_SDRAM_TYPE
#define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR2
#endif
#elif defined(CONFIG_SYS_FSL_DDR3)
typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
#ifndef CONFIG_FSL_SDRAM_TYPE
#define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR3
#endif
#elif defined(CONFIG_SYS_FSL_DDR4)
#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (3) /* FIXME */
typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
#ifndef CONFIG_FSL_SDRAM_TYPE
#define CONFIG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR4
#endif
#endif /* #if defined(CONFIG_SYS_FSL_DDR1) */
#define FSL_DDR_ODT_NEVER 0x0
#define FSL_DDR_ODT_CS 0x1
#define FSL_DDR_ODT_ALL_OTHER_CS 0x2
#define FSL_DDR_ODT_OTHER_DIMM 0x3
#define FSL_DDR_ODT_ALL 0x4
#define FSL_DDR_ODT_SAME_DIMM 0x5
#define FSL_DDR_ODT_CS_AND_OTHER_DIMM 0x6
#define FSL_DDR_ODT_OTHER_CS_ONSAMEDIMM 0x7
/* define bank(chip select) interleaving mode */
#define FSL_DDR_CS0_CS1 0x40
#define FSL_DDR_CS2_CS3 0x20
#define FSL_DDR_CS0_CS1_AND_CS2_CS3 (FSL_DDR_CS0_CS1 | FSL_DDR_CS2_CS3)
#define FSL_DDR_CS0_CS1_CS2_CS3 (FSL_DDR_CS0_CS1_AND_CS2_CS3 | 0x04)
/* define memory controller interleaving mode */
#define FSL_DDR_CACHE_LINE_INTERLEAVING 0x0
#define FSL_DDR_PAGE_INTERLEAVING 0x1
#define FSL_DDR_BANK_INTERLEAVING 0x2
#define FSL_DDR_SUPERBANK_INTERLEAVING 0x3
#define FSL_DDR_256B_INTERLEAVING 0x8
#define FSL_DDR_3WAY_1KB_INTERLEAVING 0xA
#define FSL_DDR_3WAY_4KB_INTERLEAVING 0xC
#define FSL_DDR_3WAY_8KB_INTERLEAVING 0xD
/* placeholder for 4-way interleaving */
#define FSL_DDR_4WAY_1KB_INTERLEAVING 0x1A
#define FSL_DDR_4WAY_4KB_INTERLEAVING 0x1C
#define FSL_DDR_4WAY_8KB_INTERLEAVING 0x1D
#define SDRAM_CS_CONFIG_EN 0x80000000
/* DDR_SDRAM_CFG - DDR SDRAM Control Configuration
*/
#define SDRAM_CFG_MEM_EN 0x80000000
#define SDRAM_CFG_SREN 0x40000000
#define SDRAM_CFG_ECC_EN 0x20000000
#define SDRAM_CFG_RD_EN 0x10000000
#define SDRAM_CFG_SDRAM_TYPE_DDR1 0x02000000
#define SDRAM_CFG_SDRAM_TYPE_DDR2 0x03000000
#define SDRAM_CFG_SDRAM_TYPE_MASK 0x07000000
#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24
#define SDRAM_CFG_DYN_PWR 0x00200000
#define SDRAM_CFG_DBW_MASK 0x00180000
#define SDRAM_CFG_DBW_SHIFT 19
#define SDRAM_CFG_32_BE 0x00080000
#define SDRAM_CFG_16_BE 0x00100000
#define SDRAM_CFG_8_BE 0x00040000
#define SDRAM_CFG_NCAP 0x00020000
#define SDRAM_CFG_2T_EN 0x00008000
#define SDRAM_CFG_BI 0x00000001
#define SDRAM_CFG2_FRC_SR 0x80000000
#define SDRAM_CFG2_D_INIT 0x00000010
#define SDRAM_CFG2_ODT_CFG_MASK 0x00600000
#define SDRAM_CFG2_ODT_NEVER 0
#define SDRAM_CFG2_ODT_ONLY_WRITE 1
#define SDRAM_CFG2_ODT_ONLY_READ 2
#define SDRAM_CFG2_ODT_ALWAYS 3
#define TIMING_CFG_2_CPO_MASK 0x0F800000
#if defined(CONFIG_SYS_FSL_DDR_VER) && \
(CONFIG_SYS_FSL_DDR_VER > FSL_DDR_VER_4_4)
#define RD_TO_PRE_MASK 0xf
#define RD_TO_PRE_SHIFT 13
#define WR_DATA_DELAY_MASK 0xf
#define WR_DATA_DELAY_SHIFT 9
#else
#define RD_TO_PRE_MASK 0x7
#define RD_TO_PRE_SHIFT 13
#define WR_DATA_DELAY_MASK 0x7
#define WR_DATA_DELAY_SHIFT 10
#endif
/* DDR_MD_CNTL */
#define MD_CNTL_MD_EN 0x80000000
#define MD_CNTL_CS_SEL_CS0 0x00000000
#define MD_CNTL_CS_SEL_CS1 0x10000000
#define MD_CNTL_CS_SEL_CS2 0x20000000
#define MD_CNTL_CS_SEL_CS3 0x30000000
#define MD_CNTL_CS_SEL_CS0_CS1 0x40000000
#define MD_CNTL_CS_SEL_CS2_CS3 0x50000000
#define MD_CNTL_MD_SEL_MR 0x00000000
#define MD_CNTL_MD_SEL_EMR 0x01000000
#define MD_CNTL_MD_SEL_EMR2 0x02000000
#define MD_CNTL_MD_SEL_EMR3 0x03000000
#define MD_CNTL_SET_REF 0x00800000
#define MD_CNTL_SET_PRE 0x00400000
#define MD_CNTL_CKE_CNTL_LOW 0x00100000
#define MD_CNTL_CKE_CNTL_HIGH 0x00200000
#define MD_CNTL_WRCW 0x00080000
#define MD_CNTL_MD_VALUE(x) (x & 0x0000FFFF)
#define MD_CNTL_CS_SEL(x) (((x) & 0x7) << 28)
#define MD_CNTL_MD_SEL(x) (((x) & 0xf) << 24)
/* DDR_CDR1 */
#define DDR_CDR1_DHC_EN 0x80000000
#define DDR_CDR1_ODT_SHIFT 17
#define DDR_CDR1_ODT_MASK 0x6
#define DDR_CDR2_ODT_MASK 0x1
#define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT)
#define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK)
#define DDR_CDR2_VREF_OVRD(x) (0x00008080 | ((((x) - 37) & 0x3F) << 8))
#define DDR_CDR2_VREF_TRAIN_EN 0x00000080
#define DDR_CDR2_VREF_RANGE_2 0x00000040
#if (defined(CONFIG_SYS_FSL_DDR_VER) && \
(CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
#ifdef CONFIG_SYS_FSL_DDR3L
#define DDR_CDR_ODT_OFF 0x0
#define DDR_CDR_ODT_120ohm 0x1
#define DDR_CDR_ODT_200ohm 0x2
#define DDR_CDR_ODT_75ohm 0x3
#define DDR_CDR_ODT_60ohm 0x5
#define DDR_CDR_ODT_46ohm 0x7
#elif defined(CONFIG_SYS_FSL_DDR4)
#define DDR_CDR_ODT_OFF 0x0
#define DDR_CDR_ODT_100ohm 0x1
#define DDR_CDR_ODT_120OHM 0x2
#define DDR_CDR_ODT_80ohm 0x3
#define DDR_CDR_ODT_60ohm 0x4
#define DDR_CDR_ODT_40ohm 0x5
#define DDR_CDR_ODT_50ohm 0x6
#define DDR_CDR_ODT_30ohm 0x7
#else
#define DDR_CDR_ODT_OFF 0x0
#define DDR_CDR_ODT_120ohm 0x1
#define DDR_CDR_ODT_180ohm 0x2
#define DDR_CDR_ODT_75ohm 0x3
#define DDR_CDR_ODT_110ohm 0x4
#define DDR_CDR_ODT_60hm 0x5
#define DDR_CDR_ODT_70ohm 0x6
#define DDR_CDR_ODT_47ohm 0x7
#endif /* DDR3L */
#else
#define DDR_CDR_ODT_75ohm 0x0
#define DDR_CDR_ODT_55ohm 0x1
#define DDR_CDR_ODT_60ohm 0x2
#define DDR_CDR_ODT_50ohm 0x3
#define DDR_CDR_ODT_150ohm 0x4
#define DDR_CDR_ODT_43ohm 0x5
#define DDR_CDR_ODT_120ohm 0x6
#endif
#define DDR_INIT_ADDR_EXT_UIA (1 << 31)
/* Record of register values computed */
typedef struct fsl_ddr_cfg_regs_s {
struct {
unsigned int bnds;
unsigned int config;
unsigned int config_2;
} cs[CONFIG_CHIP_SELECTS_PER_CTRL];
unsigned int timing_cfg_3;
unsigned int timing_cfg_0;
unsigned int timing_cfg_1;
unsigned int timing_cfg_2;
unsigned int ddr_sdram_cfg;
unsigned int ddr_sdram_cfg_2;
unsigned int ddr_sdram_cfg_3;
unsigned int ddr_sdram_mode;
unsigned int ddr_sdram_mode_2;
unsigned int ddr_sdram_mode_3;
unsigned int ddr_sdram_mode_4;
unsigned int ddr_sdram_mode_5;
unsigned int ddr_sdram_mode_6;
unsigned int ddr_sdram_mode_7;
unsigned int ddr_sdram_mode_8;
unsigned int ddr_sdram_mode_9;
unsigned int ddr_sdram_mode_10;
unsigned int ddr_sdram_mode_11;
unsigned int ddr_sdram_mode_12;
unsigned int ddr_sdram_mode_13;
unsigned int ddr_sdram_mode_14;
unsigned int ddr_sdram_mode_15;
unsigned int ddr_sdram_mode_16;
unsigned int ddr_sdram_md_cntl;
unsigned int ddr_sdram_interval;
unsigned int ddr_data_init;
unsigned int ddr_sdram_clk_cntl;
unsigned int ddr_init_addr;
unsigned int ddr_init_ext_addr;
unsigned int timing_cfg_4;
unsigned int timing_cfg_5;
unsigned int timing_cfg_6;
unsigned int timing_cfg_7;
unsigned int timing_cfg_8;
unsigned int timing_cfg_9;
unsigned int ddr_zq_cntl;
unsigned int ddr_wrlvl_cntl;
unsigned int ddr_wrlvl_cntl_2;
unsigned int ddr_wrlvl_cntl_3;
unsigned int ddr_sr_cntr;
unsigned int ddr_sdram_rcw_1;
unsigned int ddr_sdram_rcw_2;
unsigned int ddr_sdram_rcw_3;
unsigned int ddr_sdram_rcw_4;
unsigned int ddr_sdram_rcw_5;
unsigned int ddr_sdram_rcw_6;
unsigned int dq_map_0;
unsigned int dq_map_1;
unsigned int dq_map_2;
unsigned int dq_map_3;
unsigned int ddr_eor;
unsigned int ddr_cdr1;
unsigned int ddr_cdr2;
unsigned int err_disable;
unsigned int err_int_en;
unsigned int debug[32];
} fsl_ddr_cfg_regs_t;
typedef struct memctl_options_partial_s {
unsigned int all_dimms_ecc_capable;
unsigned int all_dimms_tckmax_ps;
unsigned int all_dimms_burst_lengths_bitmask;
unsigned int all_dimms_registered;
unsigned int all_dimms_unbuffered;
/* unsigned int lowest_common_spd_caslat; */
unsigned int all_dimms_minimum_trcd_ps;
} memctl_options_partial_t;
#define DDR_DATA_BUS_WIDTH_64 0
#define DDR_DATA_BUS_WIDTH_32 1
#define DDR_DATA_BUS_WIDTH_16 2
#define DDR_CSWL_CS0 0x04000001
/*
* Generalized parameters for memory controller configuration,
* might be a little specific to the FSL memory controller
*/
typedef struct memctl_options_s {
/*
* Memory organization parameters
*
* if DIMM is present in the system
* where DIMMs are with respect to chip select
* where chip selects are with respect to memory boundaries
*/
unsigned int registered_dimm_en; /* use registered DIMM support */
/* Options local to a Chip Select */
struct cs_local_opts_s {
unsigned int auto_precharge;
unsigned int odt_rd_cfg;
unsigned int odt_wr_cfg;
unsigned int odt_rtt_norm;
unsigned int odt_rtt_wr;
} cs_local_opts[CONFIG_CHIP_SELECTS_PER_CTRL];
/* Special configurations for chip select */
unsigned int memctl_interleaving;
unsigned int memctl_interleaving_mode;
unsigned int ba_intlv_ctl;
unsigned int addr_hash;
/* Operational mode parameters */
unsigned int ecc_mode; /* Use ECC? */
/* Initialize ECC using memory controller? */
unsigned int ecc_init_using_memctl;
unsigned int dqs_config; /* Use DQS? maybe only with DDR2? */
/* SREN - self-refresh during sleep */
unsigned int self_refresh_in_sleep;
unsigned int dynamic_power; /* DYN_PWR */
/* memory data width to use (16-bit, 32-bit, 64-bit) */
unsigned int data_bus_width;
unsigned int burst_length; /* BL4, OTF and BL8 */
/* On-The-Fly Burst Chop enable */
unsigned int otf_burst_chop_en;
/* mirrior DIMMs for DDR3 */
unsigned int mirrored_dimm;
unsigned int quad_rank_present;
unsigned int ap_en; /* address parity enable for RDIMM */
unsigned int x4_en; /* enable x4 devices */
/* Global Timing Parameters */
unsigned int cas_latency_override;
unsigned int cas_latency_override_value;
unsigned int use_derated_caslat;
unsigned int additive_latency_override;
unsigned int additive_latency_override_value;
unsigned int clk_adjust; /* */
unsigned int cpo_override;
unsigned int write_data_delay; /* DQS adjust */
unsigned int cswl_override;
unsigned int wrlvl_override;
unsigned int wrlvl_sample; /* Write leveling */
unsigned int wrlvl_start;
unsigned int wrlvl_ctl_2;
unsigned int wrlvl_ctl_3;
unsigned int half_strength_driver_enable;
unsigned int twot_en;
unsigned int threet_en;
unsigned int bstopre;
unsigned int tfaw_window_four_activates_ps; /* tFAW -- FOUR_ACT */
/* Rtt impedance */
unsigned int rtt_override; /* rtt_override enable */
unsigned int rtt_override_value; /* that is Rtt_Nom for DDR3 */
unsigned int rtt_wr_override_value; /* this is Rtt_WR for DDR3 */
/* Automatic self refresh */
unsigned int auto_self_refresh_en;
unsigned int sr_it;
/* ZQ calibration */
unsigned int zq_en;
/* Write leveling */
unsigned int wrlvl_en;
/* RCW override for RDIMM */
unsigned int rcw_override;
unsigned int rcw_1;
unsigned int rcw_2;
/* control register 1 */
unsigned int ddr_cdr1;
unsigned int ddr_cdr2;
unsigned int trwt_override;
unsigned int trwt; /* read-to-write turnaround */
} memctl_options_t;
phys_size_t fsl_ddr_sdram(void);
phys_size_t fsl_ddr_sdram_size(void);
phys_size_t fsl_other_ddr_sdram(unsigned long long base,
unsigned int first_ctrl,
unsigned int num_ctrls,
unsigned int dimm_slots_per_ctrl,
int (*board_need_reset)(void),
void (*board_reset)(void),
void (*board_de_reset)(void));
extern int fsl_use_spd(void);
void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num, int step);
u32 fsl_ddr_get_intl3r(void);
void print_ddr_info(unsigned int start_ctrl);
static void __board_assert_mem_reset(void)
{
}
static void __board_deassert_mem_reset(void)
{
}
void board_assert_mem_reset(void)
__attribute__((weak, alias("__board_assert_mem_reset")));
void board_deassert_mem_reset(void)
__attribute__((weak, alias("__board_deassert_mem_reset")));
static int __board_need_mem_reset(void)
{
return 0;
}
int board_need_mem_reset(void)
__attribute__((weak, alias("__board_need_mem_reset")));
#if defined(CONFIG_DEEP_SLEEP)
void board_mem_sleep_setup(void);
bool is_warm_boot(void);
int fsl_dp_resume(void);
#endif
/*
* The 85xx boards have a common prototype for fixed_sdram so put the
* declaration here.
*/
#ifdef CONFIG_MPC85xx
extern phys_size_t fixed_sdram(void);
#endif
#if defined(CONFIG_DDR_ECC)
extern void ddr_enable_ecc(unsigned int dram_size);
#endif
typedef struct fixed_ddr_parm{
int min_freq;
int max_freq;
fsl_ddr_cfg_regs_t *ddr_settings;
} fixed_ddr_parm_t;
#endif